Hello, to have sound on my pc i must start the sound-module before the paport- modules (parport, parport-pc). In the alsa-base i have added the line
options snd-sb16 isapnp=0 irq=7 dma8=1 dma16=5 port=0x2000 If i remove parport-pc, parport and start the sound via modprobe snd-sb16, the sound works. what can i do, that the sound will be loaded before the parport-modules? Also the tulip driver will be loaded automaticly and the dmfe module after the tulip-module. For my onboard networkcard i only use dmfe. I have added a line in /etc/modprobe.d/blacklist: blacklist tulip But the tulip-moudle will be loaded. What can i do, that the tulip-module will not be loaded? I have connected a dsl-modem to my ethernetcard. On slackware i start the dsl-connection with adsl-start. I have run pppoeconf, but pppoeconf did not create the /etc/ppp/pppoe.conf file. I also have started netcardconf, but without success. what are the steps to become a connection over the dsl-modem to the internet Thanks for your help. Dietmar _______________________________________________ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/