Hi, I use dynamic IP previously, now I need to use static IP for my ether card, which had been automatically configured by grml:
$ cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 $ ifconfig eth0 Link encap:Ethernet HWaddr 00:11:2f:be:4b:ba inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1313320 errors:0 dropped:0 overruns:0 frame:0 TX packets:1179010 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:697520612 (665.2 MiB) TX bytes:782279263 (746.0 MiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:803382 errors:0 dropped:0 overruns:0 frame:0 TX packets:803382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:233726809 (222.8 MiB) TX bytes:233726809 (222.8 MiB) How can I switch from dynamic IP to static IP now? $ grep -i network /etc/grml/autoconfig CONFIG_DEBNET='yes' # search for /etc/network/interfaces on partitions and set up network afterwards CONFIG_DISTCC='yes' # activate and setup distcc through bootparam distcc=$NETWORK,$INTERFACE Neither seems to me is the correct switch. Please help. Thanks -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/techdocs/ http://xpt.sourceforge.net/tools/ _______________________________________________ Grml mailing list - Grml@mur.at http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/