Really weird. The UI element is not necessarily guaranteed to be 100% accurate, and is not directly bound in list to what the sockets really will accept (its based on monitoring changes in any network state), but the two in combination makes me think there is something funky going on. Generally speaking, the external server socket is bound to *:23053, meaning any interface, any address on port 23053 comes to that server connection (with the exception of localhost, which we start first with a separate socket). We generally handle switches from say, wired to wifi fine. As a test when it isn't working after starting the VPN, can you try toggling Listen for Incoming Network Connections off and back on in the Network tab of Growl's Preferences? This will restart the socket that listens on *:23053 and should cause a refresh of the IP address info.
If it was just the UI problem, it would probably something in our IP address monitor isn't handling the VPN right on addition (and it still might be partly that). The socket though is listed properly by system tools as being any address on any interface, and that should include any changes to any interfaces. Have you ever seen other apps require restarting to work with the VPN? As a warning, this may be difficult for us to track down, as I have no VPN to test with. We do want to be sure it works though in as wide a variety of situations as possible though, so if you work with us on it, Im sure we can figure it out. On Aug 14, 6:57 am, Robert Derelanko <[email protected]> wrote: > This is likely not a common use of growl, but often I'm connected through a > VPN while at work. My network supplies my machine the same IP I would use > if on LAN while using the VPN. Most Growl supporting applications I use > make use of this local IP. The problem is, while connected through the VPN > my address is not a valid address in Growl's server tab UNLESS I quit and > restart grow. Then it shows up. > > Is there a way to make this list of "you can connect manually to one of > these addresses" list automatically update without having to restart growl > each time I connect to my VPN? > > Part of my testing proves that unless the IP is in that list, the machine > will not accept notifications even if any other application on my network > can talk to the machine. If I restart growl, it detects the IP and all of > my applications can now send notifications through the VPN. -- You received this message because you are subscribed to the Google Groups "Growl Discuss" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/growldiscuss?hl=en.
