Notifications for HardwareGrowler on launch are controlled by an option in HardwareGrowler's preferences pane: Show Connected Devices on Launch. On just about every mac out there, if you have all of the main modules enabled, you should get lots of notifications about current mounted drives, USB devices (including busses and things like isight cameras), and IP Address, and current network status.
I get network notifications fine for link up/down, airport connect and disconnect. Can you make sure that the module is enabled in HWG's preferences, as well as check the event types in Growl under HWG's application settings: Airport Connected, Airport Disconnected, IP Address Changed, Network Link Up, Network Link Down. These should all be on by default, but I just want to be sure something weird but simple to fix didn't happen. As for NC and Growl both displaying, if the big NC switch in Growl's general tab is on, HWG will send to both Growl, and NC, however Growl disables its visual displays, and knows that HWG has already sent to NC. It should not be sending to NC twice. If you are using the Bark plugin to send to NC, there is a known issue in Growl 2.0 with setting it to not use a visual display (and is fixed for Growl 2.0.1, which is waiting review at Apple), and can be fixed by the command line workaround that Chris posted above defaults write com.Growl.GrowlHelperApp GrowlDisplayPluginName "" On Nov 23, 4:56 am, Thierry Di Lenarda <[email protected]> wrote: > Ok, I updated as well this morning, and have no more network status updates > with HWG 2.0 > > I also noticed that HWG was sending notifications to Growl which passed them > to NC AND to the NC as well. > > I wanted to use NC as much as possible to keep the original app icon into the > notification, so I went to Growl's preferences and de-activated HWG, as it > was activated directly in the NC system preferences (and Dropbox, VLC, > Twitter, Transmission, gfxCardStatus, etc...) Each one allows both the NC or > Growl, so tons of duplicate notifications... -- You received this message because you are subscribed to the Google Groups "Growl Discuss" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/growldiscuss?hl=en.
