-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Here is the play command source code and some tunes. I don't submit a patch since I'm not sure where it will (and where the tunes will) go.
With Marco we thought about contrib/i386/pc/play.c "Ancestors" of this code are: GNU/Hurd Grub 2 cat command Grub 2 vga for inb & outb Contributors for the tunes: FSF_Song I_Feel_Pretty Indiana_Jones_Theme Summertime : GNU/Hurd Beverly Hills Cop. Star Trek: The next Generation : Marco Gerards Tetris_Theme : me Vincent Pelletier -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFC1BuHFEQoKRQyjtURAtfnAJ0Z6EyHKmArEvcGMa7ioMu66zbFZgCglHXy actaxo6QqQaFx/UfMrvtC+Q= =C1S1 -----END PGP SIGNATURE-----
/* play.c - command to play a tune */ /* * GRUB -- GRand Unified Bootloader * Copyright (C) 2003 Free Software Foundation, Inc. * * GRUB is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with GRUB; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Lots of this file is borowed from GNU/Hurd generic-speaker driver */ #include <grub/normal.h> #include <grub/dl.h> #include <grub/arg.h> #include <grub/file.h> #include <grub/disk.h> #include <grub/term.h> #include <grub/misc.h> /* Read a byte from a port. */ static inline unsigned char inb (unsigned short port) { unsigned char value; asm volatile ("inb %w1, %0" : "=a" (value) : "Nd" (port)); asm volatile ("outb %%al, $0x80" : : ); return value; } /* Write a byte to a port. */ static inline void outb (unsigned short port, unsigned char value) { asm volatile ("outb %b0, %w1" : : "a" (value), "Nd" (port)); asm volatile ("outb %%al, $0x80" : : ); } /* The speaker port. */ #define SPEAKER 0x61 /* If 0, follow state of SPEAKER_DATA bit, otherwise enable output from timer 2. */ #define SPEAKER_TMR2 0x01 /* If SPEAKER_TMR2 is not set, this provides direct input into the speaker. Otherwise, this enables or disables the output from the timer. */ #define SPEAKER_DATA 0x02 /* The PIT channel value ports. You can write to and read from them. Do not mess with timer 0 or 1. */ #define PIT_COUNTER_0 0x40 #define PIT_COUNTER_1 0x41 #define PIT_COUNTER_2 0x42 /* The frequency of the PIT clock. */ #define PIT_FREQUENCY 0x1234dd /* The PIT control port. You can only write to it. Do not mess with timer 0 or 1. */ #define PIT_CTRL 0x43 #define PIT_CTRL_SELECT_MASK 0xc0 #define PIT_CTRL_SELECT_0 0x00 #define PIT_CTRL_SELECT_1 0x40 #define PIT_CTRL_SELECT_2 0x80 /* Read and load control. */ #define PIT_CTRL_READLOAD_MASK 0x30 #define PIT_CTRL_COUNTER_LATCH 0x00 /* Hold timer value until read. */ #define PIT_CTRL_READLOAD_LSB 0x10 /* Read/load the LSB. */ #define PIT_CTRL_READLOAD_MSB 0x20 /* Read/load the MSB. */ #define PIT_CTRL_READLOAD_WORD 0x30 /* Read/load the LSB then the MSB. */ /* Mode control. */ #define PIT_CTRL_MODE_MASK 0x0e /* Interrupt on terminal count. Setting the mode sets output to low. When counter is set and terminated, output is set to high. */ #define PIT_CTRL_INTR_ON_TERM 0x00 /* Programmable one-shot. When loading counter, output is set to high. When counter terminated, output is set to low. Can be triggered again from that point on by setting the gate pin to high. */ #define PIT_CTRL_PROGR_ONE_SHOT 0x02 /* Rate generator. Output is low for one period of the counter, and high for the other. */ #define PIT_CTRL_RATE_GEN 0x04 /* Square wave generator. Output is low for one half of the period, and high for the other half. */ #define PIT_CTRL_SQUAREWAVE_GEN 0x06 /* Software triggered strobe. Setting the mode sets output to high. When counter is set and terminated, output is set to low. */ #define PIT_CTRL_SOFTSTROBE 0x08 /* Hardware triggered strobe. Like software triggered strobe, but only starts the counter when the gate pin is set to high. */ #define PIT_CTRL_HARDSTROBE 0x0a /* Count mode. */ #define PIT_CTRL_COUNT_MASK 0x01 #define PIT_CTRL_COUNT_BINARY 0x00 /* 16-bit binary counter. */ #define PIT_CTRL_COUNT_BCD 0x01 /* 4-decade BCD counter. */ #define T_REST ((short) 0) #define T_FINE ((short) -1) struct note { short pitch; short duration; }; static void beep_off (void) { unsigned char status; status = inb (SPEAKER) & ~(SPEAKER_TMR2 | SPEAKER_DATA); outb (SPEAKER, status); } static void beep_on (short pitch) { unsigned char status; unsigned int counter; if (pitch < 20) pitch = 20; else if (pitch > 20000) pitch = 20000; counter = PIT_FREQUENCY / pitch; /* Program timer 2. */ outb (PIT_CTRL, PIT_CTRL_SELECT_2 | PIT_CTRL_READLOAD_WORD | PIT_CTRL_SQUAREWAVE_GEN | PIT_CTRL_COUNT_BINARY); outb (PIT_COUNTER_2, counter & 0xff); /* LSB */ outb (PIT_COUNTER_2, (counter >> 8) & 0xff); /* MSB */ /* Start speaker. */ status = inb (SPEAKER) | SPEAKER_TMR2 | SPEAKER_DATA; outb (SPEAKER, status); } static grub_err_t grub_cmd_play (struct grub_arg_list *state __attribute__ ((unused)), int argc, char **args) { grub_file_t file; struct note buf; int tempo; unsigned int to; if (argc != 1) return grub_error (GRUB_ERR_BAD_ARGUMENT, "file name required"); file = grub_file_open (args[0]); if (! file) return 0; if (grub_file_read (file, (void *) &tempo, sizeof(tempo)) != sizeof(tempo)) return 0; grub_printf ("Now playing %s...\n", args[0]); grub_dprintf ("play","tempo = %d\n", tempo); while (grub_file_read (file, (void *) &buf, sizeof(struct note)) == sizeof(struct note) && buf.pitch != T_FINE && grub_checkkey () == -1) { grub_dprintf ("play","pitch = %d, duration = %d\n", buf.pitch, buf.duration); switch (buf.pitch) { case T_REST: beep_off (); break; default: beep_on (buf.pitch); break; } to = grub_get_rtc () + 120*buf.duration/tempo; while ((unsigned int) grub_get_rtc () <= to && grub_checkkey () == -1) ; } beep_off (); grub_printf ("Done\n"); grub_file_close (file); while (grub_checkkey () != -1) grub_getkey (); return 0; } #ifdef GRUB_UTIL void grub_play_init (void) { grub_register_command ("play", grub_cmd_play, GRUB_COMMAND_FLAG_BOTH, "play FILE", "Play a tune", 0); } void grub_play_fini (void) { grub_unregister_command ("play"); } #else /* ! GRUB_UTIL */ GRUB_MOD_INIT { (void)mod; /* To stop warning. */ grub_register_command ("play", grub_cmd_play, GRUB_COMMAND_FLAG_BOTH, "play FILE", "Play a tune", 0); } GRUB_MOD_FINI { grub_unregister_command ("play"); } #endif /* ! GRUB_UTIL */
Beverly Hills Cop.
Description: Binary data
FSF_Song
Description: Binary data
I_Feel_Pretty
Description: Binary data
Indiana_Jones_Theme
Description: Binary data
Star Trek: The Next Generation
Description: Binary data
Summertime
Description: Binary data
Tetris_Theme
Description: Binary data
_______________________________________________ Grub-devel mailing list Grub-devel@gnu.org http://lists.gnu.org/mailman/listinfo/grub-devel