hi all,
I am currently using Grub-1.95 and i installed the grub2 in my pc
using following command. I mounted the one usb to /mnt, which i using as
booting device, A\and the usb is detected as /dev/sdc in my linux machine.
grub-install --root-directory=/mnt/boot '(hd3,1)',
Installation finished. No error reported.
This is the contents of the device map /mnt/boot/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(fd0) /dev/fd0
(hd0) /dev/hda
(hd1) /dev/sda
(hd2) /dev/sdb
(hd3) /dev/sdc
and im using default grub.cfg saved in /boot/grub directory. content of
grub.cfg is given for your verification.
meout for menu
set timeout=10
# Set default boot entry as Entry 0
set default=0
# Entry 0 - Load Linux kernel
menuentry "My Linux Kernel on (hd0,1)" {
set root=(hd0,1)
linux /boot/vmlinuz-2.6.21.5 root=/dev/sda1 rootdealy=6
initrd /boot/initrd-2.6.21.5.img
}
# Entry 1 - Chainload another bootloader
menuentry "Chainload my OS" {
set root=(hd0,3)
chainloader +1
}
I try to boot the particular pc using particular device (in which i
previously installed grub2). I am getting only grub recuse > console. Any
one of you please guide me to install grub2 correctly and system boot
automatically. Thanks in advance........
-regards,
sathiyadev.
_______________________________________________
Grub-devel mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/grub-devel
