Marco Gerards wrote:
Hi,Here is a patch for testing purposes. I hope people can test this on actual hardware. Testing will help a lot for the development of the ATA driver. ... Please tell me (read this before testing!): 1) Does it work perfectly (yes/no) as in, all devices are detected and can be accessed. If no: what's the problem.
'insmod ata' prints out nothing. Then 'ls' also prints out nothing. ata.c:470: PCI dev (0,17,1) compat=0 rega=1f0 regb=3f6 ata.c:339: detecting device 0,0 (1f0, 3f6) ata.c:376: Registers: d0 d0 d0 d0 ata.c:391: incorrect signature <the same result for device 0,1> ata.c:470: PCI dev (0,17,1) compat=1 rega=0 regb=0 and that was all.
2) Did it work before applying this patch? (yes/no)
'ls' lists the first disk correctly, but the second disk is just "(ata2)" and nothing else. I'll also try the patch on my other machine, which has a promise sata controller. _______________________________________________ Grub-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/grub-devel
