The output of two tests follow. It works, to an extent. Is PXE being left in a state where the next bootloader can call it's initialization routines again?

Test 1: Boot grub PXE, chainload grub PXE, chainload grub PXE again.
Result: Chainloaded grub PXEs load in rescue mode.

Pre-boot eXecution Environment (PXE) 2.43
(C) Copyright 1999 Intel Corporation
(C) Copyright 2000 Lanworks Technologies Co. a subsidiary of 3Com Corporation
All rights reserved


CLIENT MAC ADDR: XX XX XX XX XX XX GUID: 00020003-0004-0005-0006-000700080009
CLIENT IP: 192.168.2.101  MASK: 255.255.255.0  DHCP IP: 192.168.1.1
GATEWAY IP: 192.168.2.1
Welcome to GRUB!

                             GNU GRUB  version 1.98

   Minimal BASH-like line editing is supported. For the first word, TAB
   lists possible command completions. Anywhere else TAB lists possible
   device or file completions.


grub> pxechainloader (pxe)/boot/grub/grub2pxe
grub> boot
Welcome to GRUB!

error: file not found.
Entering rescue mode...
grub rescue> insmod pxechain
grub rescue> pxechainloader (pxe)/boot/grub/grub2pxe
grub rescue> boot
Welcome to GRUB!

error: file not found.
Entering rescue mode...
grub rescue>









Test 2: Boot grub PXE, chainload pxelinux (Debian Lenny net installer)
Result: Chainloaded pxelinux fails to initialize UDP stack.

Pre-boot eXecution Environment (PXE) 2.43
(C) Copyright 1999 Intel Corporation
(C) Copyright 2000 Lanworks Technologies Co. a subsidiary of 3Com Corporation
All rights reserved


CLIENT MAC ADDR: XX XX XX XX XX XX GUID: 00020003-0004-0005-0006-000700080009
CLIENT IP: 192.168.2.101  MASK: 255.255.255.0  DHCP IP: 192.168.1.1
GATEWAY IP: 192.168.2.1
Welcome to GRUB!

                             GNU GRUB  version 1.98

   Minimal BASH-like line editing is supported. For the first word, TAB
   lists possible command completions. Anywhere else TAB lists possible
   device or file completions.


grub> pxechainloader (pxe)/boot/debian/lenny/i386/pxelinux.0
grub> boot

PXELINUX 3.71 Debian-2008-09-06  Copyright (C) 1994-2008 H. Peter Anvin
Found PXENV+ structure
PXE API version is 0201
UNDI data segment at:   00096690
UNDI data segment size: 4801
UNDI code segment at:   0009AEA0
UNDI code segment size: 3160
PXE entry point found (we hope) at 9AEA:00FA
Getting cached packet 01
Getting cached packet 02
Getting cached packet 03
My IP address seemes to be 45A84865 192.168.2.101
ip=192.168.2.101:192.168.1.1:192.168.2.1:255.255.255.0
Failed to initialize UDP stack

Boot failed: press a key to retry, or wait for reset...

--
Omni Flux

_______________________________________________
Grub-devel mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/grub-devel

Reply via email to