Hi All, I am able to boot my machine with linux kernel 2.6.32.28 from EFI shell after following the instructions http://grub.enbug.org/TestingOnMacbook
Plug-in the USB stick on EFI firmware/Shell supported x86 32bit target board. Edit the BIOS and change the boot priority to EFI shell. After target is booted on EFI shell execute the below commands Shell> fs1: fs1:\> cd efi fs1:\efi> cd grub fs1:\efi\grub> grub.efi grub> set debug=video grub> insmod efi_gop grub> boot But when I created a grub.cfg file and try to boot, my machine will show "video/efi_gop:357: GOP: Sucess" and hangs...... Any idea what is wrong with grub.cfg file or with my USB disk partitions ? My grub.cfg file contents are as below ============================================ set debug=video insmod efi_gop menuentry "Linux Kernel-2.6.32.28 (Single Image)" { linux (hd2,gpt2)/bzImage } menuentry "Linux-2.6.32.28 Kernel with custom ramdisk image" { linux (hd2,gpt2)/bzImage initrd (hd2,gpt2)/ramdisk.img } =============================================================================== My USB disk partitions are as below ================================================================================ Lenovo-Y310 nareshbhat # parted /dev/sdb GNU Parted 2.3 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: Kingston DataTraveler G2 (scsi) Disk /dev/sdb: 2000MB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 744MB 743MB fat32 2 744MB 1585MB 841MB ext2 3 1585MB 1999MB 413MB linux-swap(v1) (parted) ================================================================================== Thanks in Advance!! -Naresh Bhat _______________________________________________ Grub-devel mailing list Grub-devel@gnu.org http://lists.gnu.org/mailman/listinfo/grub-devel