On Sat, 30 Jul 2022 14:43:02 +0800 (GMT+08:00) 武校田 <[email protected]> wrote:
> Thanks for your reply. > > > Thanks for doing this testing. What are the values passed for the > > configure options --build, --host, and --target? > > I compiled it on my local machine, using the Archlinux 2022.03 LoongArch > version, the iso and repository are here: > https://mirrors.wsyu.edu.cn/loongarch/2022.03/ Ok, so to be clear, build, host, and target are all loongarch arctitecture, correct? > > > Also, would you be able to run these tests again on a system with as > > many of the make check test prerequisites installed? They are listed in > > the INSTALL file in the repository root. This would allow the testing > > of various GRUB filesystem code which is not happening now (the reason > > many tests fail with ERROR). > > I will check the dependencies required by grub-fs-tester, thanks. > > > There are two actual failure in the provided log. One is the functional > > test, which are not expected to be working. The other is the partmap > > test, which should be working. Its not clear exactly which sub-test of > > the partmap test is failing (due to output not being very verbose). If > > you add 'set -x' to the top of partmap_test and rerun the tests, I can > > get a clearer picture of what's going on. > > > > Glenn > > > > The details of this partmap_test are as follows: > > + echo 'Checking MSDOS partition types...' > Checking MSDOS partition types... > + create_disk_image /tmp/tmp.N6QvM6XPXY 64 > + name=/tmp/tmp.N6QvM6XPXY > + size=64 > + rm -f /tmp/tmp.N6QvM6XPXY > + dd if=/dev/zero of=/tmp/tmp.N6QvM6XPXY bs=512 count=1 seek=131071 > status=noxfer > 记录了1+0 的读入 > 记录了1+0 的写出 > + parted -a none -s /tmp/tmp.N6QvM6XPXY mklabel msdos > + list_parts part_msdos /tmp/tmp.N6QvM6XPXY /tmp/tmp.dOULt2UJMN > + mod=part_msdos > + shift > + imgfile=/tmp/tmp.N6QvM6XPXY > + shift > + outfile=/tmp/tmp.dOULt2UJMN > + shift > + ./grub-shell --disk=/tmp/tmp.N6QvM6XPXY --modules=part_msdos > + echo ls > WARNING: Image format was not specified for '/tmp/tmp.N6QvM6XPXY' and probing > guessed raw. > Automatically detecting the format is dangerous for raw images, > write operations on block 0 will be restricted. > Specify the 'raw' format explicitly to remove the restrictions. > WARNING: Image format was not specified for '/tmp/tmp.mQzmZs2ROc' and probing > guessed raw. > Automatically detecting the format is dangerous for raw images, > write operations on block 0 will be restricted. > Specify the 'raw' format explicitly to remove the restrictions. > + cat /tmp/tmp.dOULt2UJMN > + tr -d '\n\r' > (hd0) (hd1) (hd1,gpt3) (hd1,gpt2,msdos1) (hd1,gpt2) (hd1,gpt1) + echo > > + check_output /tmp/tmp.dOULt2UJMN hd2 > + outfile=/tmp/tmp.dOULt2UJMN > + shift > + for dsk in $@ > + grep '(hd2)' /tmp/tmp.dOULt2UJMN > ++ cat /tmp/tmp.dOULt2UJMN > + echo '(hd2): disk/partiton not found in: (hd0) (hd1) (hd1,gpt3) > (hd1,gpt2,msdos1) (hd1,gpt2) (hd1,gpt1) ' > (hd2): disk/partiton not found in: (hd0) (hd1) (hd1,gpt3) (hd1,gpt2,msdos1) > (hd1,gpt2) (hd1,gpt1) > + exit 1 > FAIL partmap_test (exit status: 1) > > It looks like it can't find '(hd2)' in the output. Ok, I believe my comments on patch #9 will successfully address this. What is odd here is that the image file /tmp/tmp.N6QvM6XPXY appears to be reused from a prior test run because at this point is should not have gpt partitions, just an MSDOS header with no partitions. So something seems off here. Glenn > > ------------------------------ > Best Regards > Xiaotian Wu > > > 本邮件及其附件含有龙芯中科的商业秘密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制或散发）本邮件及其附件中的信息。如果您错收本邮件，请您立即电话或邮件通知发件人并删除本邮件。 > > This email and its attachments contain confidential information from Loongson > Technology , which is intended only for the person or entity whose address is > listed above. Any use of the information contained herein in any way > (including, but not limited to, total or partial disclosure, reproduction or > dissemination) by persons other than the intended recipient(s) is prohibited. > If you receive this email in error, please notify the sender by phone or > email immediately and delete it. > _______________________________________________ > Grub-devel mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/grub-devel _______________________________________________ Grub-devel mailing list [email protected] https://lists.gnu.org/mailman/listinfo/grub-devel
