在 2023-04-10星期一的 03:20 -0300，Glenn Washburn写道：
> On 4/8/23 02:05, Xiaotian Wu wrote:
> > The test results of running "make check" with qemu 7.2 are as
> > follows:
> >
> > ===================================================================
> > =========
> > Testsuite summary for GRUB 2.11
> >
> > ===================================================================
> > =========
> > # TOTAL: 85
> > # PASS: 57
> > # SKIP: 8
> > # XFAIL: 0
> > # FAIL: 1
> > # XPASS: 0
> > # ERROR: 19
> >
> > ===================================================================
> > =========
> >
> > These ERROR cases need to be run as root user:
> > ERROR: ext234_test
> > ERROR: hfsplus_test
> > ERROR: ntfs_test
> > ERROR: reiserfs_test
> > ERROR: fat_test
> > ERROR: minixfs_test
> > ERROR: xfs_test
> > ERROR: f2fs_test
> > ERROR: nilfs2_test
> > ERROR: romfs_test
> > ERROR: exfat_test
> > ERROR: udf_test
> > ERROR: hfs_test
> > ERROR: jfs_test
> > ERROR: btrfs_test
> > ERROR: zfs_test
> > ERROR: luks1_test
> > ERROR: luks2_test
> > ERROR: grub_cmd_cryptomount
>
> It would be great if you would follow the instructions in the INSTALL
> file to install the appropriate dependencies and to run the tests as
> root. Are you suggesting that you do not have access to the root
> user?
I can try to retest with root, but maybe the test case will fail.
> >
> > These test cases are skipped:
> > SKIP: pata_test
> > SKIP: ahci_test
> > SKIP: uhci_test
> > SKIP: ohci_test
> > SKIP: ehci_test
> > SKIP: fddboot_test
> > SKIP: netboot_test
> > SKIP: pseries_test
> >
> > This test case fails because of: qemu-system-loongarch64: ram_size
> > must be greater than 1G.
> > FAIL: grub_func_test
>
> This sounds strange to me because you give QEMU 4G of memory in
> grub-shell (see below). Are you saying that you ran the tests on a
> system with 1G or less of memory?
>
Yes, I set the memory to 4G, but on line 16 of the
"tests/grub_func_test.in" file, it is reset to 512M.
> >
> > Signed-off-by: Xiaotian Wu <wuxiaot...@loongson.cn>
> > ---
> > tests/ahci_test.in | 2 +-
> > tests/ehci_test.in | 2 +-
> > tests/ohci_test.in | 2 +-
> > tests/pata_test.in | 2 +-
> > tests/uhci_test.in | 2 +-
> > tests/util/grub-shell.in | 14 ++++++++++++++
> > 6 files changed, 19 insertions(+), 5 deletions(-)
> >
> > diff --git a/tests/ahci_test.in b/tests/ahci_test.in
> > index 6d2e61d4e..70646a24e 100644
> > --- a/tests/ahci_test.in
> > +++ b/tests/ahci_test.in
> > @@ -30,7 +30,7 @@ case "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" in
> > mips*-arc | mips*-qemu_mips)
> > exit 77;;
> > # FIXME: No native drivers are available for those
> > - powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi)
> > + powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi | loongarch64-
> > efi)
> > exit 77;;
> > esac
> >
> > diff --git a/tests/ehci_test.in b/tests/ehci_test.in
> > index df671b4b6..bf823a5de 100644
> > --- a/tests/ehci_test.in
> > +++ b/tests/ehci_test.in
> > @@ -30,7 +30,7 @@ case "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" in
> > mips*-arc | mips*-qemu_mips)
> > exit 77;;
> > # FIXME: No native drivers are available for those
> > - powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi)
> > + powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi | loongarch64-
> > efi)
> > exit 77;;
> > esac
> >
> > diff --git a/tests/ohci_test.in b/tests/ohci_test.in
> > index 741ad881f..a40d3bc0a 100644
> > --- a/tests/ohci_test.in
> > +++ b/tests/ohci_test.in
> > @@ -30,7 +30,7 @@ case "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" in
> > mips*-arc | mips*-qemu_mips)
> > exit 77;;
> > # FIXME: No native drivers are available for those
> > - powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi)
> > + powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi | loongarch64-
> > efi)
> > exit 77;;
> > esac
> >
> > diff --git a/tests/pata_test.in b/tests/pata_test.in
> > index 31144a8fd..4d0e7d573 100644
> > --- a/tests/pata_test.in
> > +++ b/tests/pata_test.in
> > @@ -33,7 +33,7 @@ case "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" in
> > i386-efi)
> > exit 77;;
> > # FIXME: No native drivers are available for those
> > - powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi)
> > + powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi | loongarch64-
> > efi)
> > exit 77;;
> > i386-ieee1275)
> > disk=hdb
> > diff --git a/tests/uhci_test.in b/tests/uhci_test.in
> > index 5aa5eb726..de199a281 100644
> > --- a/tests/uhci_test.in
> > +++ b/tests/uhci_test.in
> > @@ -30,7 +30,7 @@ case "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" in
> > mips*-arc | mips*-qemu_mips)
> > exit 77;;
> > # FIXME: No native drivers are available for those
> > - powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi)
> > + powerpc-ieee1275 | sparc64-ieee1275 | arm*-efi | loongarch64-
> > efi)
> > exit 77;;
> > esac
> >
> > diff --git a/tests/util/grub-shell.in b/tests/util/grub-shell.in
> > index 75f71dc1a..bbeb63ef4 100644
> > --- a/tests/util/grub-shell.in
> > +++ b/tests/util/grub-shell.in
> > @@ -208,6 +208,16 @@ case "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" in
> > disk="device virtio-blk-device,drive=hd1 -drive
> > if=none,id=hd1,file="
> > serial_port=efi0
> > ;;
> > + loongarch64-efi)
> > + qemu=qemu-system-loongarch64
> > + boot=hd
> > + console=console
> > + trim=1
> > + qemuopts="-machine virt -cpu la464-loongarch-cpu -smp 4 -
> > nographic -m 4G \
> > + -bios /usr/share/edk2/loongarch64/QEMU_CODE.fd
> > $qemuopts"
>
> The tests are only officially supported on Debian. So is this
> firmware
> file installed from a Debian package? If so what is the package name
> and
> what apt repository is it located?
I did a local test on archlinux, the package is "edk2-loongarch64", the
installation directory refers to the packaging rules of fedora and
archlinux, it will be installed in the "/usr/share/edk2/<arch>/"
directory.
edk2-aarch64 on fedora:
https://koji.fedoraproject.org/koji/rpminfo?rpmID=33833091
edk2-riscv64 on fedora:
https://koji.fedoraproject.org/koji/rpminfo?rpmID=33833092
edk2-aarch64 on archlinux:
https://archlinux.org/packages/extra/any/edk2-aarch64/
edk2-arm on archlinux:
https://archlinux.org/packages/extra/any/edk2-arm/
edk2-loongarch64 on archlinux:
https://mirrors.wsyu.edu.cn/loongarch/archlinux/extra/os/loong64/edk2-loongarch64-202211-4-any.pkg.tar.zst
>
> Glenn
>
> > + disk="device virtio-blk-pci,drive=hd1 -drive
> > if=none,id=hd1,file="
> > + serial_port=
> > + ;;
> > *)
> > boot=hd
> > qemu=qemu-system-i386
> > @@ -423,6 +433,8 @@ fi
> > if [ x$boot = xhd ]; then
> > if [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" =
> > arm64-efi ] || [ "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" = arm-efi ]; then
> > device="device virtio-blk-device,drive=hd0 -drive
> > if=none,id=hd0,file="
> > + elif [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" =
> > loongarch64-efi ]; then
> > + device="device virtio-blk-pci,drive=grubdisk -drive
> > if=none,id=grubdisk,file="
> > elif [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}"
> > = mips-arc ]; then
> > device="hdb "
> > else
> > @@ -433,6 +445,8 @@ fi
> > if [ x$boot = xcd ]; then
> > if [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" =
> > arm64-efi ] || [ "${grub_modinfo_target_cpu}-
> > ${grub_modinfo_platform}" = arm-efi ]; then
> > device="device virtio-blk-device,drive=cd0 -drive
> > if=none,id=cd0,media=cdrom,file="
> > + elif [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" =
> > loongarch64-efi ]; then
> > + device="device virtio-blk-pci,drive=grubcd -drive
> > if=none,id=grubcd,media=cdrom,file="
> > elif [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}"
> > = powerpc-ieee1275 ] && [ x$pseries != xy ] ; then
> > device="-drive if=ide,media=cdrom,file="
> > else
>
>
> _______________________________________________
> Grub-devel mailing list
> Grub-devel@gnu.org
> https://lists.gnu.org/mailman/listinfo/grub-devel
--
Best Regards
Xiaotian Wu
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
https://lists.gnu.org/mailman/listinfo/grub-devel
