Ludovic Courtès (2014-11-23 01:17 +0300) wrote: > David Thompson <dthomps...@worcester.edu> skribis: > >> I am experiencing the exact same issue. If you check *Guix REPL*, >> you'll see that compiling 'guix-main.scm' fails for some reason. Not >> sure why. I gave up on it for now. > > Can you try ,bt and ,error in there?
IIUC the REPL is dead, so what can be done is sending the full contents of *Guix REPL* buffer here so we could look at it. > Most likely, either Geiser’s or Guix’s Scheme modules are not in the > search path when the REPL is started. I had to fiddle with > ‘geiser-scheme-dir’ and ‘geiser-guile-load-path’. No need to fiddle with ‘geiser-scheme-dir’: it should be set properly if you have ‘(require 'geiser-install)’ in your emacs config. Also you made a commit for ‘geiser-guile-load-path’ (a1ca1b7) after the release, so fiddling with this var will not take any effect. David wrote on #guix that he has "~/.guile" file with some additional settings. AFAICT it is loaded only if ‘geiser-guile-load-init-file-p’ was set to a non-nil value. -- Alex