Per Roberto Congiu: certo che ho provato ad entrare nel bios (quindi ho
schiacciato F10) ed ho visto che si poteva fare il boot da cd ma il mio
problema
è che non c'è l'opzione per l'avvio da cd esterno (usb), opzione invece
contemplata nel mio vecchio laptop Asus.
Grazie comunque, buona giornata. :)
'zisku
>Hai provato a schiacciare F10 al boot ?
>
>Secondo il manuale http://h10032.www1.hp.com/ctg/Manual/c01550108.pdf
>a pagina 105
>
>"Open the Setup Utility by turning on or restarting the computer. While the
>?Press the ESC key for
>
>Startup Menu? message is displayed in the lower-left corner of the screen,
>press
>f10."
>
>Quindi nel System Configuration Menu
>
>System Configuration menu
>Select To do this
>Language Support Change the Setup Utility language.
>Button Sound (select models only) Enable/disable the capacitive button tapping
>sound.
>Virtualization Technology Enable/disable the processor Virtualization
>Technology.
>Processor C4 State (select
>models only)
>Enable/disable the processor C4 sleep state.
>LAN Power Saving (select
>models only)
>Enable/disable LAN Power Saving. When enabled, saves power when the computer
>is in DC mode.
>Card Reader/1394 Power Saving (select
>models only)
>Enable/disable Card Reader/1394 Power Saving. When enabled, saves power when
>the computer is in DC mode.
>Fan Always On Enabled/disable Fan Always On. When enabled, the computer fan
>will
>always be on.
>Boot Options Set the following boot options:
>? f9 and f10 Delay (sec.)?Set the delay for the f9 and f10 functions of the
>Setup
>Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
>? CD-ROM boot?Enable/disable boot from CD-ROM.
>? Floppy boot?Enable/disable boot from diskette.
>
>Come vedi appena qua sopra c'e' l'opzione per abilitare/disabilitare il CD-ROM
>
>R.
_______________________________________________
Gulchelp mailing list
[email protected]
http://www.gulch.crs4.it/cgi-bin/mailman/listinfo/gulchelp
