Voilà mon fichier de config. Il est fait pour une SuSE 9.1 installÃe sur
un Dell Inspiron 8200.
Ãa marche bien avec un Ãcran externe (je l'ai configurà en mode Clone
avec une dÃfinition de 1024x768).
Pour le mode TV (Composite) il faut changer dans la Section
"ServerLayout" le Screen CRT en Screen TV. Mais il y a un dÃfaut (au
moins avec la config que j'ai, je ne sais pas s'il se vÃrifie aussi pour
s'autres config) et c'est qu'il est impossible de revenire en mode texte
si on est passÃs en mode TV.
Je n'ai pas compris comment permettre l'activation simultanÃe du DFP,
CRT et TV avec choix automatique entre CRT et TV.
Aparamment la carte identifie toute seule si le CRT et le TV sont
connectÃs, mais il n'est pas possible de mettre des dÃfinitions
conditionnelles dans le XF86Config. Si quelcun a une idÃe je suis
prÃneur.
Il est possible de dÃfinir aussi une position et avoir un Ãcran plus
grand (changer Clone avec RightOf ou LeftOf ou autre (voir le manuel de
NVidia)), mais pour un projÃcteur ou une TV je pense que c'est plus
utile le mode Clone.
ciao, Leo
Il lun, 2004-09-13 alle 17:09, GrÃgoire MÃtral ha scritto:
> Hello,
>
> J'aimerais projeter une prÃsentation depuis mon portable, mais pas moyen
> de trouver la bonne config... Un peu d'aide? J'ai un Dell avec RedHat 9.
> Quand je switche vers le beamer depuis l'interface standard, Ãa
> s'affiche sans problÃme. Depuis l'interface graphique, "noir, c'est
> noir" (mais il y a encore de l'espoir!). Je prÃcise qu'avec un Ãcran
> externe, j'ai les mÃmes symptÃmes :-(
>
> Si tout se trouve dans XF86Config, voilà les ÃlÃments actuels:
>
> Section "Monitor"
> Identifier "Monitor0"
> ModelName "Dell 1600x1200 Laptop Display Panel"
> HorizSync 31.5 - 90.0
> VertRefresh 59.0 - 85.0
> Option "dpms"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "nv"
> BoardName nVidia GeForce 2 Go"
> VideoRam 32768
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864"
> "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> ... et mes ajouts (d'aprÃs ce que j'ai trouvà dans la doc du beamer):
>
> Section "Monitor"
> Identifier "BeamerEpson"
> ModelName "Epson EMP-51"
> HorizSync 15.0 - 92.0
> VertRefresh 50.0 - 85.0
> EndSection
>
> Section "Screen"
> Identifier "Beamer"
> Device "Videocard0"
> Monitor "BeamerEpson"
> DefaultDepth 16
> SubSection "Display"
> Depth 16
> Modes "800x600"
> EndSubSection
> EndSection
>
>
> J'ai un peu inventà les questions "depth", le mode 800x600 devrait Ãtre
> le mode reconnu par dÃfaut (c'est du SVGA/XGA d'aprÃs la doc, mais il
> vaut mieux Ãtre prudent), et je ne sais pas s'il faut dÃfinir un autre
> "device" pour indiquer que c'est le port externe.
>
> J'ai Ãtonnamment trouvà trÃs peu de doc sur ce sujet (et exclusivement
> sur des doubles Ãcrans qui ne m'ont pas aidÃs)... Alors que j'ai vu
> souvent des prÃsentations à partir de portables ÃquipÃs de linux! C'est
> donc si simple?
>
> Merci!
> Greg
>
> _______________________________________________
> gull mailing list
> [EMAIL PROTECTED]
> http://lists.alphanet.ch/mailman/listinfo/gull
>
>
# /.../
# SaX generated XFree86 config file
# Created on: 2004-09-14T18:57:24+0200.
#
# Version: 4.8
# Contact: Marcus Schaefer <[EMAIL PROTECTED]>, 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "extmod"
Load "freetype"
Load "v4l"
Load "type1"
Load "speedo"
EndSection
Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "RightCtl" "Compose"
Option "XkbLayout" "fr_CH"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "5"
Option "Device" "/dev/mouse"
Option "Name" "Autodetection"
Option "Protocol" "ExplorerPS/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Autodetection"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 360 270
HorizSync 15-85
Identifier "Monitor DFP"
ModelName "[EMAIL PROTECTED]"
Option "DPMS"
VendorName "--> LCD"
VertRefresh 30-90
EndSection
Section "Monitor"
DisplaySize 360 270
HorizSync 30-95
Identifier "Monitor CRT"
ModelName "[EMAIL PROTECTED]"
Option "DPMS"
VendorName "--> LCD"
VertRefresh 58-78
EndSection
Section "Monitor"
DisplaySize 360 270
Identifier "Monitor TV"
ModelName "[EMAIL PROTECTED]"
Option "DPMS"
VendorName "--> LCD"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device CRT"
Identifier "Screen CRT"
Monitor "Monitor CRT"
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1280x960"
"1152x864" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device TV"
Identifier "Screen TV"
Monitor "Monitor TV"
EndSection
Section "Device"
BoardName "GeForce4 440 Go"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device CRT"
Option "HWcursor"
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "64"
Option "NoLogo" "on"
Option "RenderAccel" "on"
VendorName "NVidia"
Option "Twinview"
Option "TwinviewOrientation" "Clone"
Option "SecondMonitorHorizSync" "15-85"
Option "SecondMonitorVertRefresh" "30-90"
Option "MetaModes" "DFP:1600x1200,CRT:[EMAIL PROTECTED];
DFP:1280x1024,CRT:[EMAIL PROTECTED]; DFP:1024x768,CRT:1024x768;
DFP:800x600,CRT:800x600; DFP:640x480,CRT:640x480"
EndSection
Section "Device"
BoardName "GeForce4 440 Go"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device TV"
Option "HWcursor"
Option "CursorShadow" "on"
Option "CursorShadowAlpha" "64"
Option "NoLogo" "on"
Option "RenderAccel" "on"
VendorName "NVidia"
Option "Twinview"
Option "TwinviewOrientation" "Clone"
Option "SecondMonitorHorizSync" "15-85"
Option "SecondMonitorVertRefresh" "30-90"
Option "MetaModes" "DFP:1600x1200,TV:[EMAIL PROTECTED];
DFP:1280x1024,TV:[EMAIL PROTECTED]; DFP:1024x768,TV:[EMAIL PROTECTED];
DFP:800x600,TV:800x600; DFP:640x480,TV:640x480"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "COMPOSITE"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Screen "Screen CRT"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
