Saludos a lista Colegas
Como se puede detallar la traza de entrada del ppp, de manera tal que parazca el nombre del usuario que esta conectado y el que intento conectar tengo esta configuracion el el ppp y mgetty, gracias de antemano por la ayuda. mgetty.config port ttyS0 init-chat "" ATZ statistics-chat "" AT OK ATI2 OK statistics-file /var/log/statistics.ttyS2 debug 8 speed 57600 data-only yes rings 1 inettab # /etc/inittab: init(8) configuration. # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $ # The default runlevel. id:2:initdefault: # Boot-time system configuration/initialization script. # This is run first except when booting in emergency (-b) mode. si::sysinit:/etc/init.d/rcS # What to do in single-user mode. ~~:S:wait:/sbin/sulogin # /etc/init.d executes the S and K scripts upon change # of runlevel. # # Runlevel 0 is halt. # Runlevel 1 is single-user. # Runlevels 2-5 are multi-user. # Runlevel 6 is reboot. l0:0:wait:/etc/init.d/rc 0 l1:1:wait:/etc/init.d/rc 1 l2:2:wait:/etc/init.d/rc 2 l3:3:wait:/etc/init.d/rc 3 l4:4:wait:/etc/init.d/rc 4 l5:5:wait:/etc/init.d/rc 5 l6:6:wait:/etc/init.d/rc 6 # Normally not reached, but fallthrough in case of emergency. z6:6:respawn:/sbin/sulogin # What to do when CTRL-ALT-DEL is pressed. ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now # Action on special keypress (ALT-UpArrow). #kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work." # What to do when the power fails/returns. pf::powerwait:/etc/init.d/powerfail start pn::powerfailnow:/etc/init.d/powerfail now po::powerokwait:/etc/init.d/powerfail stop # /sbin/getty invocations for the runlevels. # # The "id" field MUST be the same as the last # characters of the device (after "tty"). # # Format: # <id>:<runlevels>:<action>:<process> # # Note that on most Debian systems tty7 is used by the X Window System, # so if you want to add more getty's go ahead but skip tty7 if you run X. # 1:2345:respawn:/sbin/getty 38400 tty1 2:23:respawn:/sbin/getty 38400 tty2 3:23:respawn:/sbin/getty 38400 tty3 4:23:respawn:/sbin/getty 38400 tty4 5:23:respawn:/sbin/getty 38400 tty5 6:23:respawn:/sbin/getty 38400 tty6 # Example how to put a getty on a serial line (for a terminal) # #T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100 #T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100 # Example how to put a getty on a modem line. # T0:2345:respawn:/sbin/mgetty -n2 -s 57600 -D ttyS0 ppp/options -detach +pap -chap asyncmap 0 modem crtscts lock require-pap refuse-chap ms-dns 192.0.0.2 login noauth /var/log/mgetty/mg_ttyS0.log 03/02 15:36:02 yS0 mgetty: interim release 1.1.36-Jun15 03/02 15:36:02 yS0 check for lockfiles 03/02 15:36:02 yS0 checklock: no active process has lock, will remove 03/02 15:36:02 yS0 locking the line 03/02 15:36:02 yS0 makelock(ttyS0) called 03/02 15:36:02 yS0 do_makelock: lock='/var/lock/LCK..ttyS0' 03/02 15:36:02 yS0 lock made 03/02 15:36:02 yS0 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD 03/02 15:36:02 yS0 WARNING: DCD line still active, check modem settings (AT&Dx) 03/02 15:36:02 yS0 lowering DTR to reset Modem 03/02 15:36:03 yS0 tss: set speed to 57600 (10001) 03/02 15:36:03 yS0 tio_set_flow_control( HARD ) 03/02 15:36:03 yS0 waiting for line to clear (VTIME=1), read: 03/02 15:36:03 yS0 send: ATZ[0d] 03/02 15:36:03 yS0 send: AT[0d] 03/02 15:36:03 yS0 do_stat: expect 'OK' ** found ** 03/02 15:36:03 yS0 send: ATI2[0d] 03/02 15:36:03 yS0 do_stat: expect 'OK' ** found ** 03/02 15:36:03 yS0 waiting for line to clear (VTIME=3), read: [0a] 03/02 15:36:03 yS0 removing lock file 03/02 15:36:03 yS0 waiting... 03/02 15:42:43 yS0 select returned 1 03/02 15:42:43 yS0 checking lockfiles, locking the line 03/02 15:42:43 yS0 makelock(ttyS0) called 03/02 15:42:43 yS0 do_makelock: lock='/var/lock/LCK..ttyS0' 03/02 15:42:43 yS0 lock made 03/02 15:42:43 yS0 wfr: waiting for ``RING'' 03/02 15:42:43 yS0 got: [0d][0a]RING[0d] 03/02 15:42:43 yS0 CND: RING 03/02 15:42:43 yS0 wfr: rc=0, drn=0 03/02 15:42:43 yS0 wfr: waiting for ``RING'' 03/02 15:42:43 yS0 got: [0a][0d][0a]RING[0d] 03/02 15:42:48 yS0 CND: RING 03/02 15:42:48 yS0 wfr: rc=0, drn=0 03/02 15:42:48 yS0 CND: check no: 'none' 03/02 15:42:48 yS0 CND: check vs: 299285 03/02 15:42:48 yS0 send: ATA[0d] 03/02 15:42:48 yS0 waiting for ``CONNECT'' 03/02 15:42:48 yS0 got: ATA[0d] 03/02 15:42:48 yS0 CND: ATA[0d][0a]CONNECT ** found ** 03/02 15:43:00 yS0 send: 03/02 15:43:00 yS0 waiting for ``_'' 03/02 15:43:00 yS0 got: 57600[0d] 03/02 15:43:00 yS0 CND: CONNECT 57600 03/02 15:43:00 yS0 CND: found: 57600[0a] ** found ** 03/02 15:43:00 yS0 waiting for line to clear (VTIME=3), read: 03/02 15:43:00 yS0 looking for utmp entry... (my PID: 3254) 03/02 15:43:00 yS0 utmp + wtmp entry made 03/02 15:43:01 yS0 tio_set_flow_control( HARD ) 03/02 15:43:01 yS0 print welcome banner (/etc/issue) 03/02 15:43:01 yS0 getlogname (FIDO AUTO_PPP), read:~[ff]}#[c0]! 03/02 15:43:11 yS0 input finished with '\r', setting ICRNL ONLCR 03/02 15:43:11 yS0 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD 03/02 15:43:11 yS0 login: use login config file /etc/mgetty/login.config 03/02 15:43:11 yS0 match: user='/AutoPPP/', key='' 03/02 15:43:11 yS0 match: user='/AutoPPP/', key='' 03/02 15:43:11 yS0 match: user='/AutoPPP/', key='/AutoPPP/'*** hit! 03/02 15:43:11 yS0 login: utmp entry: a_ppp 03/02 15:43:11 yS0 looking for utmp entry... (my PID: 3254) 03/02 15:43:11 yS0 utmp + wtmp entry made 03/02 15:43:11 yS0 calling login: cmd='/usr/sbin/pppd', argv[]='pppd file /etc/ppp/options' 03/02 15:43:11 yS0 setenv: 'CALLER_ID=none' 03/02 15:43:11 yS0 setenv: 'CONNECT=57600' 03/02 15:43:11 yS0 setenv: 'DEVICE=ttyS0' 03/02 15:43:11 ##### data dev=ttyS0, pid=3254, caller='none', conn='57600', name='', cmd='/usr/sbin/pppd', user='/AutoPPP/' no veo el usuario por ningun lado ______________________________________________________________________ Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. Gutl-l@jovenclub.cu https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l