Para el que tenga problemas con la Epson LX-300 le recomiendo este PPD El mié, 16-05-2012 a las 15:31 -0400, Ariel Crespo Sori escribió: > bueno ya eso es otra cosa yo tengo uno de expson 1050 que con esos me > sirve para la lx300+, dime si los quieres para enviartelos al privado > > Maidel Modesto Martinez Aviles escribió: > > sip los lei pero alguien lo ha logrado varios colegas aca le sucede los > > mismos alguien tiene los driver de las expson para subirlos cuando se esta > > agregando la impresora > > > > --- > > Maidel Martinez Aviles > > Joven Club Tunas VI > > Administrador de Redes Tunas VI > > Correo:maidel05...@ltu.jovenclub.cu > > JabberID:maidel05...@jabber.ltu.jovenclub.cu > > Telef: (0131) 349007 > > Las Tunas > > > > > >> ---- Original Message ---- > >> From: Ariel Crespo Sori<ariel.cre...@cmg.jovenclub.cu> > >> To: "Lista cubana de soporte técnico en Tecnologias > >> Libres"<gutl-l@jovenclub.cu> > >> Sent: Mie, May 16, 2012, 15:19 PM > >> Subject: Re: [Gutl-l] sigo sin instalar impresora en Debian 6 > >> > >> buenas tardes colega > >> > >> al parecer no haz leido muy bien los email que te han mandado, ya te han > >> respondido varias veces y al parecer vienes de windows, yo te lo dire > >> otra ves. > >> > >> en linux es un poco diferente > >> > >> primero si tienes todo instalado y sin problemas > >> > >> entoces abres un navegador y pones http://localhost:631/ y ahy te sale > >> el administrador de impresoras y como veras haybotones para agregar > >> impresoras > >> > >> espero que te sirva esto > >> > >> saludos > >> > >> Maidel Modesto Martinez Aviles escribió: > >>> todo lo eso si ta bien, he comprobado y esta bien todo > >>> el lio es ahora de unir he intentado con 2 epxon de 9 pines y lx300+ > >>> y nada > >>> --- > >>> Maidel Martinez Aviles > >>> Joven Club Tunas VI > >>> Administrador de Redes Tunas VI > >>> Correo:maidel05...@ltu.jovenclub.cu > >>> JabberID:maidel05...@jabber.ltu.jovenclub.cu > >>> Telef: (0131) 349007 > >>> Las Tunas > >>> > >>> > >>>> ---- Original Message ---- > >>>> From: Alberto José García Fumero<albe...@ettpartagas.co.cu> > >>>> To: "Lista cubana de soporte técnico en > >>>> TecnologiasLibres"<gutl-l@jovenclub.cu> > >>>> Sent: Mie, May 16, 2012, 14:51 PM > >>>> Subject: Re: [Gutl-l] sigo sin instalar impresora en Debian 6 > >>>> > >>>> Debian nos pide que seamos pacientes... no entiende que estemos > >>>> apurados ;-) > >>>> > >>>> Supongo que estás completamente seguro de que CUPS está instalado... > >>>> pero ve por pasos: > >>>> > >>>> Comprueba que tienes cups (aptitude install cups) y de no ser así > >>>> instálalo. Y ya que estás ahí, hplip y amigos. Porsia... ya te hará > >>>> falta en algún momento más adelante. > >>>> > >>>> Ahora vienen las preguntas: > >>>> > >>>> ¿Qué tipo de impresora es? (no se trata igual una impresora de matriz de > >>>> puntos que una láser... ya te darás cuenta**) > >>>> > >>>> ¿Dónde está conectada esa impresora? (A un servidor de impresión; a una > >>>> máquina Window$ con contraseña, sin contraseña, con otras restricciones > >>>> que no sepas; a una máquina Linux...) Lo primero es ver cómo puedes > >>>> acceder a esa impresora. Necesitas saber el nombre con que se está > >>>> compartiendo (tiene que estar compartida por el sistema que sea). > >>>> > >>>> Si está instalada en un Window$ y no puedes llegarte hasta esa máquina a > >>>> mirarlo, o preguntárselo a los demás que supuestamente la usan > >>>> compartida, siempre el comando smbclient te informará. Por ejemplo: > >>>> smbclient -L máquinaWin<enter>te dirá lo que comparte la susodicha > >>>> máquina. > >>>> > >>>> En Debian 6 tienes dos formas al menos de incorporar la impresora: > >>>> usando el menú /Sistema/Administración/Impresión y mediante la página > >>>> que te propone CUPS. Para esta última opción, apunta tu navegador a: > >>>> http://localhost:631 > >>>> > >>>> Busca la opción de añadir impresora y declárala como impresora > >>>> compartida por Window$ a la que accederás mediante SAMBA. Una impresora > >>>> compartida por un Window$ saldrá algo así como: smb://miguel-w/HPLJ1022 > >>>> así que ten en mente que el protocolo que usarás será smb (Samba). > >>>> > >>>> Si la impresora la comparte un servidor de impresión es otra la > >>>> mecánica.. puede que haya que acceder mediante, por ejemplo, algo como > >>>> lpd://192.168.0.254/. > >>>> > >>>> Una impresora compartida por un Linux podría ser algo como: > >>>> ipp://192.168.0.49/printers/HP-LaserJet-1022, que es otra forma de decir > >>>> que normalmente vas por el puerto 631 ("IPP printing normally happens > >>>> over port 631 and uses the http and ipp URI schemes") aunque algunas > >>>> impresoras no parecen entenderlo y entonces accederías por > >>>> http://máquina:631/printers/nombre-compartido > >>>> > >>>> La página de CUPS que tienes en localhost:631 trae mucha información > >>>> (sórri, in ínglich!). > >>>> > >>>> Prueba y nos dices. Y siéntanse libre de sacarme tarjeta amarilla si > >>>> estoy diciendo algo mal! > >>>> > >>>> Fumero > >>>> > >>>> ** > >>>> Para algunas impresoras puede que no tengas un driver apropiado en > >>>> Linux. En esos casos puede ser que logres imprimir DESDE un Linux HACIA > >>>> impresora conectada a un Window$, pero que no puedas conectarla > >>>> directamente a tu Linux (me pasaba con la HP LaserJet P1006 y Ubuntu > >>>> 9.04; creo que con Debian Lenny también). Y hay impresoras de punto > >>>> para las cuales las cosas nunca parecen salir bien... a la FX-1170 jamás > >>>> le he podido sacar la hoja ancha (lo tengo como tarea pendiente). > >>>> > >>>> > >>>> El mié, 16-05-2012 a las 07:51 -0400, Juan Carlos escribió: > >>>>> El 15/05/12 16:32, l...@ida.cu escribió: > >>>>>> Hola a todos > >>>>>> > >>>>>> sigo sin poder añadir una impresora a l Debi9an 6 que tengo instalado > >>>>>> Instalo cups pero me pide dependencias y por eso no se instala como > >>>>>> hacer eso en una misma linea de comando como los codec de video y > >>>>>> sonido? > >>>>>> > >>>>>> agradezco a todos la ayuda > >>>>>> > >>>>>> ______________________________________________________________________ > >>>>>> Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. > >>>>>> Gutl-l@jovenclub.cu > >>>>>> https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l > >>>>>> > >>>>> Pero luis... mira entonces usa este comando apt-get -f install cups > >>>>> > >>>>> > >>>>> Salu2 > >>>>> > >>>> -- > >>>> M.Sc. Alberto García Fumero > >>>> Usuario Linux 97 318, registrado 10/12/1998 > >>>> Las autoridades sanitarias advierten: > >>>> El uso prolongado de Windows puede provocar dependencia. > >>>> > >>>> > >>>> -- > >>>> Todos los mensajes enviados por este servidor han sido revisados con > >>>> ClamAV en Partagas y se consideran limpios. > >>>> > >>>> ______________________________________________________________________ > >>>> Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. > >>>> Gutl-l@jovenclub.cu > >>>> https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l > >>> ______________________________________________________________________ > >>> Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. > >>> Gutl-l@jovenclub.cu > >>> https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l > >>> > >> > >> ______________________________________________________________________ > >> Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. > >> Gutl-l@jovenclub.cu > >> https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l > > > > ______________________________________________________________________ > > Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. > > Gutl-l@jovenclub.cu > > https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l > > > > > ______________________________________________________________________ > Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. > Gutl-l@jovenclub.cu > https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l
------------ próxima parte ------------ *PPD-Adobe: "4.3" *% *% For information on using this, and to obtain the required backend *% script, consult http://www.openprinting.org/ *% *% This file is published under the GNU General Public License *% *% PPD-O-MATIC (4.0.0 or newer) generated this PPD file. It is for use with *% all programs and environments which use PPD files for dealing with *% printer capability information. The printer must be configured with the *% "foomatic-rip" backend filter script of Foomatic 4.0.0 or newer. This *% file and "foomatic-rip" work together to support PPD-controlled printer *% driver option access with all supported printer drivers and printing *% spoolers. *% *% To save this file on your disk, wait until the download has completed *% (the animation of the browser logo must stop) and then use the *% "Save as..." command in the "File" menu of your browser or in the *% pop-up manu when you click on this document with the right mouse button. *% DO NOT cut and paste this file into an editor with your mouse. This can *% introduce additional line breaks which lead to unexpected results. *% *% You may save this file as 'Epson-LX-300plus-ibmpro.ppd' *% *% *FormatVersion: "4.3" *FileVersion: "1.1" *LanguageVersion: English *LanguageEncoding: ISOLatin1 *PCFileName: "IBMPRO.PPD" *Manufacturer: "Epson" *Product: "(LX-300+)" *cupsVersion: 1.0 *cupsManualCopies: True *cupsModelNumber: 2 *cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip" *cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip" *%pprRIP: foomatic-rip other *ModelName: "Epson LX-300+" *ShortNickName: "Epson LX-300+ ibmpro" *NickName: "Epson LX-300+ Foomatic/ibmpro (recommended)" *PSVersion: "(3010.000) 550" *PSVersion: "(3010.000) 651" *PSVersion: "(3010.000) 652" *PSVersion: "(3010.000) 653" *PSVersion: "(3010.000) 704" *PSVersion: "(3010.000) 705" *PSVersion: "(3010.000) 800" *PSVersion: "(3010.000) 815" *PSVersion: "(3010.000) 850" *PSVersion: "(3010.000) 860" *PSVersion: "(3010.000) 861" *PSVersion: "(3010.000) 862" *PSVersion: "(3010.000) 863" *PSVersion: "(3010.000) 864" *PSVersion: "(3010.000) 870" *LanguageLevel: "3" *ColorDevice: False *DefaultColorSpace: Gray *FileSystem: False *Throughput: "1" *LandscapeOrientation: Plus90 *TTRasterizer: Type42 *1284DeviceID: "DRV:Dibmpro,R1,M0,TG;" *driverName ibmpro: "" *driverType G/Ghostscript built-in: "" *driverUrl: "http://www.ghostscript.com/" *driverObsolete: False *driverManufacturerSupplied: False *HWMargins: 18 36 18 36 *VariablePaperSize: True *MaxMediaWidth: 100000 *MaxMediaHeight: 100000 *NonUIOrderDependency: 100 AnySetup *CustomPageSize *CustomPageSize True: "pop pop pop pop pop %% FoomaticRIPOptionSetting: PageSize=Custom" *End *FoomaticRIPOptionSetting PageSize=Custom: " -dDEVICEWIDTHPOINTS=0 -dD&& EVICEHEIGHTPOINTS=0" *End *ParamCustomPageSize Width: 1 points 36 100000 *ParamCustomPageSize Height: 2 points 36 100000 *ParamCustomPageSize Orientation: 3 int 0 0 *ParamCustomPageSize WidthOffset: 4 points 0 0 *ParamCustomPageSize HeightOffset: 5 points 0 0 *FoomaticIDs: Epson-LX-300plus ibmpro *FoomaticRIPCommandLine: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPA&& USE -dNOINTERPOLATE -sDEVICE=ibmpro%A%Z -sOutputFile=- -" *End *OpenGroup: General/General *OpenUI *PageSize/Page Size: PickOne *FoomaticRIPOption PageSize: enum CmdLine A *OrderDependency: 100 AnySetup *PageSize *DefaultPageSize: A4 *PageSize Letter/US Letter: "%% FoomaticRIPOptionSetting: PageSize=Letter" *FoomaticRIPOptionSetting PageSize=Letter: " -dDEVICEWIDTHPOINTS=612 -&& dDEVICEHEIGHTPOINTS=792" *End *PageSize A4/A4: "%% FoomaticRIPOptionSetting: PageSize=A4" *FoomaticRIPOptionSetting PageSize=A4: " -dDEVICEWIDTHPOINTS=595 -dDEV&& ICEHEIGHTPOINTS=842" *End *PageSize 3x5/3x5: "%% FoomaticRIPOptionSetting: PageSize=3x5" *FoomaticRIPOptionSetting PageSize=3x5: " -dDEVICEWIDTHPOINTS=216 -dDE&& VICEHEIGHTPOINTS=360" *End *PageSize 4x6/4x6: "%% FoomaticRIPOptionSetting: PageSize=4x6" *FoomaticRIPOptionSetting PageSize=4x6: " -dDEVICEWIDTHPOINTS=288 -dDE&& VICEHEIGHTPOINTS=432" *End *PageSize 5x7/5x7: "%% FoomaticRIPOptionSetting: PageSize=5x7" *FoomaticRIPOptionSetting PageSize=5x7: " -dDEVICEWIDTHPOINTS=360 -dDE&& VICEHEIGHTPOINTS=504" *End *PageSize 5x8/5x8: "%% FoomaticRIPOptionSetting: PageSize=5x8" *FoomaticRIPOptionSetting PageSize=5x8: " -dDEVICEWIDTHPOINTS=360 -dDE&& VICEHEIGHTPOINTS=576" *End *PageSize 6x8/6x8: "%% FoomaticRIPOptionSetting: PageSize=6x8" *FoomaticRIPOptionSetting PageSize=6x8: " -dDEVICEWIDTHPOINTS=432 -dDE&& VICEHEIGHTPOINTS=576" *End *PageSize 8x10/8x10: "%% FoomaticRIPOptionSetting: PageSize=8x10" *FoomaticRIPOptionSetting PageSize=8x10: " -dDEVICEWIDTHPOINTS=576 -dD&& EVICEHEIGHTPOINTS=720" *End *PageSize 8x12/8x12: "%% FoomaticRIPOptionSetting: PageSize=8x12" *FoomaticRIPOptionSetting PageSize=8x12: " -dDEVICEWIDTHPOINTS=576 -dD&& EVICEHEIGHTPOINTS=864" *End *PageSize 11x14/11x14: "%% FoomaticRIPOptionSetting: PageSize=11x14" *FoomaticRIPOptionSetting PageSize=11x14: " -dDEVICEWIDTHPOINTS=792 -d&& DEVICEHEIGHTPOINTS=1008" *End *PageSize 11x14.Transverse/14x11: "%% FoomaticRIPOptionSetting: PageSize=11x14.Transverse" *FoomaticRIPOptionSetting PageSize=11x14.Transverse: " -dDEVICEWIDTHPO&& INTS=1008 -dDEVICEHEIGHTPOINTS=792" *End *PageSize 16x20/16x20: "%% FoomaticRIPOptionSetting: PageSize=16x20" *FoomaticRIPOptionSetting PageSize=16x20: " -dDEVICEWIDTHPOINTS=1152 -&& dDEVICEHEIGHTPOINTS=1440" *End *PageSize 16x24/16x24: "%% FoomaticRIPOptionSetting: PageSize=16x24" *FoomaticRIPOptionSetting PageSize=16x24: " -dDEVICEWIDTHPOINTS=1152 -&& dDEVICEHEIGHTPOINTS=1728" *End *PageSize 210x305mm/210x305mm (8.3x12): "%% FoomaticRIPOptionSetting: PageSize=210x305mm" *FoomaticRIPOptionSetting PageSize=210x305mm: " -dDEVICEWIDTHPOINTS=59&& 5 -dDEVICEHEIGHTPOINTS=864" *End *PageSize 378x279mm.Transverse/US Standard Fanfold (14.875x11): "%% FoomaticRIPOptionSetting: PageSize=378x279mm.Transverse" *FoomaticRIPOptionSetting PageSize=378x279mm.Transverse: " -dDEVICEWID&& THPOINTS=1071 -dDEVICEHEIGHTPOINTS=792" *End *PageSize A3/A3: "%% FoomaticRIPOptionSetting: PageSize=A3" *FoomaticRIPOptionSetting PageSize=A3: " -dDEVICEWIDTHPOINTS=842 -dDEV&& ICEHEIGHTPOINTS=1191" *End *PageSize FanFoldGerman/German Standard Fanfold (8.5x12): "%% FoomaticRIPOptionSetting: PageSize=FanFoldGerman" *FoomaticRIPOptionSetting PageSize=FanFoldGerman: " -dDEVICEWIDTHPOINT&& S=612 -dDEVICEHEIGHTPOINTS=864" *End *PageSize Legal/US Legal: "%% FoomaticRIPOptionSetting: PageSize=Legal" *FoomaticRIPOptionSetting PageSize=Legal: " -dDEVICEWIDTHPOINTS=612 -d&& DEVICEHEIGHTPOINTS=1008" *End *PageSize SuperB/Super B (13x19): "%% FoomaticRIPOptionSetting: PageSize=SuperB" *FoomaticRIPOptionSetting PageSize=SuperB: " -dDEVICEWIDTHPOINTS=936 -&& dDEVICEHEIGHTPOINTS=1368" *End *CloseUI: *PageSize *OpenUI *PageRegion: PickOne *OrderDependency: 100 AnySetup *PageRegion *DefaultPageRegion: A4 *PageRegion Letter/US Letter: "%% FoomaticRIPOptionSetting: PageSize=Letter" *PageRegion A4/A4: "%% FoomaticRIPOptionSetting: PageSize=A4" *PageRegion 3x5/3x5: "%% FoomaticRIPOptionSetting: PageSize=3x5" *PageRegion 4x6/4x6: "%% FoomaticRIPOptionSetting: PageSize=4x6" *PageRegion 5x7/5x7: "%% FoomaticRIPOptionSetting: PageSize=5x7" *PageRegion 5x8/5x8: "%% FoomaticRIPOptionSetting: PageSize=5x8" *PageRegion 6x8/6x8: "%% FoomaticRIPOptionSetting: PageSize=6x8" *PageRegion 8x10/8x10: "%% FoomaticRIPOptionSetting: PageSize=8x10" *PageRegion 8x12/8x12: "%% FoomaticRIPOptionSetting: PageSize=8x12" *PageRegion 11x14/11x14: "%% FoomaticRIPOptionSetting: PageSize=11x14" *PageRegion 11x14.Transverse/14x11: "%% FoomaticRIPOptionSetting: PageSize=11x14.Transverse" *PageRegion 16x20/16x20: "%% FoomaticRIPOptionSetting: PageSize=16x20" *PageRegion 16x24/16x24: "%% FoomaticRIPOptionSetting: PageSize=16x24" *PageRegion 210x305mm/210x305mm (8.3x12): "%% FoomaticRIPOptionSetting: PageSize=210x305mm" *PageRegion 378x279mm.Transverse/US Standard Fanfold (14.875x11): "%% FoomaticRIPOptionSetting: PageSize=378x279mm.Transverse" *PageRegion A3/A3: "%% FoomaticRIPOptionSetting: PageSize=A3" *PageRegion FanFoldGerman/German Standard Fanfold (8.5x12): "%% FoomaticRIPOptionSetting: PageSize=FanFoldGerman" *PageRegion Legal/US Legal: "%% FoomaticRIPOptionSetting: PageSize=Legal" *PageRegion SuperB/Super B (13x19): "%% FoomaticRIPOptionSetting: PageSize=SuperB" *CloseUI: *PageRegion *DefaultImageableArea: A4 *ImageableArea Letter/US Letter: "18 36 594 756" *ImageableArea A4/A4: "18 36 577 806" *ImageableArea 3x5/3x5: "18 36 198 324" *ImageableArea 4x6/4x6: "18 36 270 396" *ImageableArea 5x7/5x7: "18 36 342 468" *ImageableArea 5x8/5x8: "18 36 342 540" *ImageableArea 6x8/6x8: "18 36 414 540" *ImageableArea 8x10/8x10: "18 36 558 684" *ImageableArea 8x12/8x12: "18 36 558 828" *ImageableArea 11x14/11x14: "18 36 774 972" *ImageableArea 11x14.Transverse/14x11: "18 36 990 756" *ImageableArea 16x20/16x20: "18 36 1134 1404" *ImageableArea 16x24/16x24: "18 36 1134 1692" *ImageableArea 210x305mm/210x305mm (8.3x12): "18 36 577 828" *ImageableArea 378x279mm.Transverse/US Standard Fanfold (14.875x11): "18 36 1053 756" *ImageableArea A3/A3: "18 36 824 1155" *ImageableArea FanFoldGerman/German Standard Fanfold (8.5x12): "18 36 594 828" *ImageableArea Legal/US Legal: "18 36 594 972" *ImageableArea SuperB/Super B (13x19): "18 36 918 1332" *DefaultPaperDimension: A4 *PaperDimension Letter/US Letter: "612 792" *PaperDimension A4/A4: "595 842" *PaperDimension 3x5/3x5: "216 360" *PaperDimension 4x6/4x6: "288 432" *PaperDimension 5x7/5x7: "360 504" *PaperDimension 5x8/5x8: "360 576" *PaperDimension 6x8/6x8: "432 576" *PaperDimension 8x10/8x10: "576 720" *PaperDimension 8x12/8x12: "576 864" *PaperDimension 11x14/11x14: "792 1008" *PaperDimension 11x14.Transverse/14x11: "1008 792" *PaperDimension 16x20/16x20: "1152 1440" *PaperDimension 16x24/16x24: "1152 1728" *PaperDimension 210x305mm/210x305mm (8.3x12): "595 864" *PaperDimension 378x279mm.Transverse/US Standard Fanfold (14.875x11): "1071 792" *PaperDimension A3/A3: "842 1191" *PaperDimension FanFoldGerman/German Standard Fanfold (8.5x12): "612 864" *PaperDimension Legal/US Legal: "612 1008" *PaperDimension SuperB/Super B (13x19): "936 1368" *CloseGroup: General *% Generic boilerplate PPD stuff as standard PostScript fonts and so on *DefaultFont: Courier *Font AvantGarde-Book: Standard "(001.006S)" Standard ROM *Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM *Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM *Font Bookman-Demi: Standard "(001.004S)" Standard ROM *Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM *Font Bookman-Light: Standard "(001.004S)" Standard ROM *Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM *Font Courier: Standard "(002.004S)" Standard ROM *Font Courier-Bold: Standard "(002.004S)" Standard ROM *Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM *Font Courier-Oblique: Standard "(002.004S)" Standard ROM *Font Helvetica: Standard "(001.006S)" Standard ROM *Font Helvetica-Bold: Standard "(001.007S)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM *Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM *Font Palatino-Bold: Standard "(001.005S)" Standard ROM *Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM *Font Palatino-Italic: Standard "(001.005S)" Standard ROM *Font Palatino-Roman: Standard "(001.005S)" Standard ROM *Font Symbol: Special "(001.007S)" Special ROM *Font Times-Bold: Standard "(001.007S)" Standard ROM *Font Times-BoldItalic: Standard "(001.009S)" Standard ROM *Font Times-Italic: Standard "(001.007S)" Standard ROM *Font Times-Roman: Standard "(001.007S)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM *Font ZapfDingbats: Special "(001.004S)" Standard ROM ______________________________________________________________________ Lista de correos del Grupo de Usuarios de Tecnologías Libres de Cuba. Gutl-l@jovenclub.cu https://listas.jovenclub.cu/cgi-bin/mailman/listinfo/gutl-l