Hi Lars-Göran, 2010/1/18 Lars-Göran Edholm <lged.mor...@gmail.com>: > Hi! > I have tested the new gvSIG3D build in Windows 7 and it does open raster > files but it is very slow. > > In Gvsig 1.1.2 with 3D pilot and Windows XP everything is fine, I can open: > Raster dem with overlays like > Ortophoto (raster) > several shp-files type water, roads, buildings elevation curves etc > and everything goes smooth, I can zoom, rotate etc. I can use it to show > interactiv to an audiens. > > In Gvsig 1.9 3D build11 and Windows 7 or Windows XP you can open: > Raster dem with overlays > but only 1 overlay shows at atime, if you check the layers in the layerlist > only the overlay at the bottom of the layerlist is visible > If you uncheck the overlay at the bottom of the layerlist, the next overlay > is visible etc. > With overlaying with Ortophoto (raster) I also see a grid > Everything is very slow, zooming, panning etc is very jumpy. It feels like > all resources on the computer > is used.
Which system do you have?, I mean Processor, Memory and Graphics card, this could gives us more clues to find the problem, but my first guess is a OpenGL Driver Problem with your Windows 7 installation. Did you check if you have the last graphics drivers for your system? > > I hope that the funcionality of Gvsig 1.1.2 with 3D pilot can be reached > with gvSIG3D build in Windows 7 It does and even more, so the only I could say is that your drivers are not up to date. Rafa. > > Lars-Göran Edholm > _______________________________________________ > Gvsig_internacional mailing list > Gvsig_internacional@listserv.gva.es > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > -- Rafael Gaitán Linares Instituto de Automática e Informática Industrial http://www.ai2.upv.es Ciudad Politécnica de la Innovación Universidad Politécnica de Valencia _______________________________________________ Gvsig_internacional mailing list Gvsig_internacional@listserv.gva.es http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional