Jordi, Please wait at least until the end of this month with RC1 if you can. The beginning of the year is usually a very busy period, and people might simply not have had the time to test and report back yet (including me).
Ben ----- Original Message ----- > HI NIcklas, > > Did you finally saw a 3D view? Can you tell us how the performance was > with your fglrx drivers? > > We are a bit desencouraged about the call for testing, because nobody > said directly that the test was succesful. > If any other on the list have tested 3D with or without success, > please answer to this thread, is the way to fix the problems or to see > some feedback from the community. If no body reports major problems we > will go for RC1 next weeks. > > Your screenshots are wellcome! > > Cheers! > > > > 2011/1/10 Jordi Torres < [email protected] > > > > Hi Nicklas, > > Great to hear this!! You are the first which have working 3D extension > in linux and fglrx driver!! Feel free to send a patch and become a > contributor to gvSIG 3D. Here you have the instructions[1]. If you > don't have enough time I will do the job for the next release (RC1) > and you will be a contributor anyway :) . > > About PostGIS in the gvSIG code sprint[2] many bugs were fixes. Maybe > you can use a translator, the web is in spanish. Anyway other people > in the community can speak about postGis better than me... Hope they > read this thread. > > We are a bit curious about performance with fglrx drivers. How it > goes? Letter 's' toggles the statistics in a 3D view. > > Cheers, and good work! > > [1] > https://gvsig.org/web/projects/gvsig-desktop/docs/devel/gvsig-devel-guide/2.0.0/anexos/contribuciones-y-parches-al-codigo-de-gvsig/contributions-and-patches-to-the-gvsig-code/view?set_language=en > [2] http://www.doowikis.com/m/Jy3H1rZ7AP > > > > > > 2011/1/10 Nicklas Avén < [email protected] > > > > Hallo again > > I had it working. First I tried: > > pathtoGL=$(find /usr/lib/fglrx -iname libGL.so.1); > > then it found libGL.so.1 but couldn't load it. > > But when I changed to > > pathtoGL=$(find /usr/lib32/fglrx -iname libGL.so.1); > > it works. > > Now it is just that issue that I don't get the Z-values from PostGIS. > > Is that patch available? Is it difficult to compile. As I understood > it the bug is not in the 3D-extension but in the desktop application? > > Then I found another issue: > At least in the 3D-extension, I haven't tried the 2D view, If I load a > PostGIS table that table gets locked. Even after I have deleted it > from the view I can't drop it in PostGIS. > > There must be some sort of locking left also efter removing the table > from gvSIG. > > Regards > > Nicklas > > > > > > > On Mon, 2011-01-10 at 14:09 +0100, Jordi Torres wrote: > > Hi Nicklas, > > > > I think you will have to convert your polyhedralsurfaces to > > polygons, but you can test anyway... > > > > I am waiting eagerly for this screenshots!! > > > > Cheers. > > > > 2011/1/10 Nicklas Avén < [email protected] > > > Great! > > > > Thanks both of you. > > > > I will get back with some nice screenshots of ST_3DShortesline > > on polyhedralsurfaces when I get some extra time and things are > > running. > > > > > > BTW, will the 3D extension understand the geometry type > > polyhedralsurface or do I have to use ST_Dump to get a bunch > > of 3D > > polygons instead? > > > > > > Thanks again > > > > Nicklas > > > > > > > > On Mon, 2011-01-10 at 13:37 +0100, Jordi Torres wrote: > > > Hi Nicklas, > > > > > > With no doubt the best cards to use with linux are NVIDIA > > one's. Their > > > private drivers runs like a charm in linux machines. And > > they are a > > > couple of steps advanced with respect to ATI, at least in > > linux... > > > > > > The problem you are experiencing is that gvSIG 3D can't find > > your > > > libGL.so.1 implementation (usually in /usr/lib/ ). It has > > been fixed > > > for Mesa drivers, but not for ATI private drivers. You can > > take a look > > > in the script gvSIG.sh to see what we do with mesa drivers > > and try to > > > do something similar. Or you can, of course, wait for RC1 > > version. > > > > > > As ben recommended, take a look to phoronix, and compare > > chipsets and > > > drivers.... :) > > > > > > Cheers. > > > > > > 2011/1/10 Nicklas Avén < [email protected] > > > > Here it comes :-) > > > > > > > > > On Mon, 2011-01-10 at 13:27 +0100, Jordi Torres > > wrote: > > > > Hi Nicklas, > > > > > > > > Can you send the > > > > file > > /home/nicklas/gvSIG_1.10/bin/hs_err_pid6059.log ? This > > > file > > > > contains the log for the native crash. > > > > > > > > As Benjamin said, ATI 3D support in linux have > > been > > > problematic for a > > > > long time. Anyway we know we have a problem with > > ati cards > > > in linux > > > > and private drivers. We will do our best to fix it > > for RC1 > > > version. > > > > > > > > Cheers. > > > > > > > > > > > > > > > > > > > > 2011/1/10 Nicklas Avén > > < [email protected] > > > > > I have had some problems seeing the > > beginning of the > > > startup > > > > of gcSIG > > > > since it was too long to be scrollable in > > the > > > terminal. But > > > > now I > > > > outputted it to file and I am not sure it > > is about > > > the video > > > > card. > > > > > > > > I attach both glxint and the output of the > > gvSIG > > > start that > > > > ends with a > > > > crash > > > > > > > > When I installed I tried to just follow > > the > > > instructions which > > > > resulted > > > > in two folders in my home directory: > > > > gvSIG and gvSIG_1.10 > > > > > > > > to start I have to manually kick on script > > gvSIG-sh > > > in > > > > bin-directory under gvSIG_1.10 > > > > > > > > > > > > > > > > Thanks > > > > > > > > Nicklas > > > > > > > > > > > > here comes glxinfo output as attachment. > > > > > > > > My system is Ubuntu 10.4 64 bit > > > > > > > > I have had some problems getting the error > > text. I > > > cannot find > > > > it in ant > > > > log and the text is so long so the start > > with the > > > actual > > > > > > > > > > > > On Mon, 2011-01-10 at 12:58 +0100, Jordi > > Torres > > > wrote: > > > > > Hi Nicklas, > > > > > > > > > > About PostGis tables giving 2D > > geometries is a bug > > > that have > > > > been > > > > > tracked and a fixed[1]. The fix (a patch > > submitted > > > by Jose > > > > Carlos > > > > > Martínez from UPV) are not in the svn > > yet, is > > > waiting to be > > > > assigned > > > > > and merged. We hope it will be merged > > for gvSIG > > > 1.11 > > > > release. > > > > > > > > > > With respect to your ATI card: are you > > using > > > driver Mesa or > > > > fglrx? Can > > > > > you send to the list a glxinfo output > > please? > > > > > > > > > > Thanks for test the 3D extension! > > > > > > > > > > Cheers. > > > > > > > > > > 2011/1/10 Nicklas Avén > > > < [email protected] > > > > > > Hallo > > > > > > > > > > Actually I started trying some > > the last > > > week without > > > > knowing > > > > > it was that > > > > > new :-) > > > > > > > > > > What I have tried is against > > PostGIS in an > > > attempt > > > > to > > > > > visualize the new > > > > > polyhedral surface and 3D > > distance > > > functions in the > > > > trunk > > > > > comming in > > > > > PostGIS 2.0. > > > > > > > > > > In Ubuntu gvSIG crashes when I > > have the > > > extension > > > > installed. I > > > > > translated some spanish post > > with google > > > on the > > > > subject and I > > > > > guess it > > > > > is a problem with my ATI-card. > > The > > > symptoms looked > > > > very > > > > > similar. Is > > > > > there a solution for that? > > > > > > > > > > In windows I had some other > > trouble. When > > > I had > > > > defined and > > > > > opened a 3D > > > > > view I could open a PostGIS > > table, but I > > > didn't get > > > > the third > > > > > dimmension. Properties said that > > it was a > > > 2d > > > > polygon. I guess > > > > > that can > > > > > be a JDBC-problem. But I don't > > know enough > > > about > > > > that to say > > > > > anything. > > > > > > > > > > Another problem on windows was > > that when I > > > had > > > > loaded my > > > > > postgis table > > > > > the cpu went wild. some > > java-process took > > > all > > > > recourses. > > > > > > > > > > All this was maybe a week ago. > > > > > > > > > > But I saw the idea, and it > > looked > > > great :-) > > > > > > > > > > > > > > > Regards > > > > > Nicklas Avén > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 2011-01-10 at 12:02 > > +0100, Jordi > > > Torres > > > > wrote: > > > > > > Hi gvSIG users! > > > > > > > > > > > > As many of you already know, > > the gvSIG > > > 3D team is > > > > working > > > > > hard to get > > > > > > a final version of the 3D > > extension. > > > During > > > > christmas > > > > > hollydays a beta > > > > > > version have been released. > > After this > > > version we > > > > will > > > > > create > > > > > > consecutives RC (release > > candidates) > > > fixing the > > > > bugs > > > > > detected to > > > > > > arrive to the final release. > > > > > > > > > > > > We are specially interested in > > the > > > community > > > > testing and > > > > > feedback, > > > > > > because the proper functioning > > of this > > > extension > > > > depends on > > > > > the > > > > > > hardware and drivers used. Our > > target is > > > to detect > > > > the > > > > > maximum number > > > > > > of bugs, and which > > configurations are > > > working > > > > well/bad to > > > > > fix these > > > > > > problems in the RC1 version. > > > > > > > > > > > > We recommend to take a look to > > the > > > minimum > > > > requirements[1] > > > > > before to > > > > > > install the 3D extension[2], > > and do it > > > in a > > > > separate gvSIG > > > > > 1.10 final > > > > > > installation. All your > > comments, > > > suggestions and > > > > bug reports > > > > > are > > > > > > wellcome. You can write to > > gvSIG > > > distribution > > > > lists or to > > > > > the gvSIG 3D > > > > > > blog[3], where you can find > > > videotutorials and use > > > > examples. > > > > > > > > > > > > Thank you very much in > > advance! > > > > > > > > > > > > > > > > > > > > > > > > > > [1] > > https://gvsig.org/web/projects/gvsig-desktop/official/gvsig-1.10/extensiones-gvsig-1.10/extension-3d/system-requirements/view?set_language=en > > > > > > > > > > > > > > > > > > > > [2] > > https://gvsig.org/web/projects/gvsig-desktop/official/gvsig-1.10/extensiones-gvsig-1.10/extension-3d/downloads > > > > > > [3] http://gvsig3d.blogspot.com > > > > > > > > > > > > > > > > > > > > > > > > -- Jordi Torres Fabra -- > > > > > > > > > > > > gvSIG 3D blog > > > > > > http://gvsig3d.blogspot.com Instituto de Automática e > > Informática > > > Industrial > > > > > > http://www.ai2.upv.es > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Gvsig_internacional mailing > > list > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Gvsig_internacional mailing list > > > > > > > [email protected] > > > > > > > > > > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > > > > > > > > > > > > > > > > -- Jordi Torres Fabra > > > > > > > > > > gvSIG 3D blog > > > > > http://gvsig3d.blogspot.com Instituto de Automática e > > > > > Informática > > Industrial > > > > > http://www.ai2.upv.es > > > > > > > _______________________________________________ > > > > > Gvsig_internacional mailing list > > > > > [email protected] > > > > > > > > > > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Gvsig_internacional mailing list > > > > [email protected] > > > > > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > > > > > > > > > > > -- Jordi Torres Fabra > > > > > > > > gvSIG 3D blog > > > > http://gvsig3d.blogspot.com Instituto de Automática e > > > > Informática Industrial > > > > http://www.ai2.upv.es > > > > _______________________________________________ > > > > Gvsig_internacional mailing list > > > > [email protected] > > > > > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > > > _______________________________________________ > > > Gvsig_internacional mailing list > > > [email protected] > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > > > > > > -- Jordi Torres Fabra > > > > > > gvSIG 3D blog > > > http://gvsig3d.blogspot.com Instituto de Automática e Informática > > > Industrial > > > http://www.ai2.upv.es > > > _______________________________________________ > > > Gvsig_internacional mailing list > > > [email protected] > > > > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > _______________________________________________ Gvsig_internacional > > mailing list > > [email protected] > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > > > > > > > -- Jordi Torres Fabra > > > > gvSIG 3D blog > > http://gvsig3d.blogspot.com Instituto de Automática e Informática > > Industrial > > http://www.ai2.upv.es > > _______________________________________________ Gvsig_internacional > > mailing list > > [email protected] > > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > _______________________________________________ Gvsig_internacional > mailing list > [email protected] > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional > > > > -- Jordi Torres Fabra > > gvSIG 3D blog > http://gvsig3d.blogspot.com Instituto de Automática e Informática > Industrial > http://www.ai2.upv.es > > > > -- Jordi Torres Fabra > > gvSIG 3D blog > http://gvsig3d.blogspot.com Instituto de Automática e Informática > Industrial > http://www.ai2.upv.es > > _______________________________________________ Gvsig_internacional > mailing list > [email protected] > http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional ------ Files attached to this email may be in ISO 26300 format (OASIS Open Document Format). If you have difficulty opening them, please visit http://iso26300.info for more information. _______________________________________________ Gvsig_internacional mailing list [email protected] http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
