Oh do they now!
I never had that problem.
Perhaps you got ripped off!
I know I sure believe every thing I heard second hand!
Thank you Rick, for your the latest address to be added to my block
senders
list!
KG.
----- Original Message -----
From: "Rick Harmon" <[email protected]>
To: "Missy Hoppe" <[email protected]>; <[email protected]>
Sent: Monday, December 21, 2009 7:37 PM
Subject: Re: [GW-Booksense] BookSense 2.0 changes
GW Micro stated this causes problems with the internal speakers. do
you
want louder volume at the risk of blowing out your speakers and having
to
send the unit back to HMS for repair?
I'd rather not have my speakers prematurely blown out by too loud of
volumes
applied to them. I heard many times on the 1.1 settings where the
speakers
rattled a lot. This isn't a good thing.
Rick
----- Original Message -----
From: "Missy Hoppe" <[email protected]>
To: <[email protected]>
Sent: Monday, December 21, 2009 9:17 PM
Subject: Re: [GW-Booksense] BookSense 2.0 changes
Agreed. The maximum volume most definitely needs to be bumped up again.
It
still meets my needs, but only just. I have to walk very slow on
tredmill to
still hear the built in speaker on max volume. Before, could walk a bit
faster.
There's got to be a way to get the best of both worlds. Agree about
volume's
1 through 5; are't even worth mentioning; might as wel be muted.
Still, I'm not complaining. I love my booksense as much as ever, and am
extremely happy with all the new features; if only this volume thing
could
be resolved to meet everyone's needs.
With all that being said, though, I completely agree with what Raul
said
earlier today. Let's just all sit back, relax, have a merry Christmas
and
enjoy the new firmware for a little while before we really start
picking
it
apart too much.
Missy
----- Original Message -----
From: "Keith Gillard" <[email protected]>
To: "Raul A. Gallegos" <[email protected]>; "Book Sense Discussion List"
<[email protected]>
Cc: "GW Info Discussion List" <[email protected]>; "GW Notetaker
Discussion List" <[email protected]>
Sent: Monday, December 21, 2009 9:03 PM
Subject: Re: [GW-Booksense] BookSense 2.0 changes
Hi,
Just fired up 2.0.
Right off the bat I want it known that HIMS definitly over compensated
on
the speaker volume adjustmens.
Speaker Volume levels 1 to 5 are now so low that they are all vut
useless
unless your a mouse!
Maximum volume is still OK however, the BS volume advantege over the
stream
is no longer a selling point.
The issue with the volume in beta 1.1 was the discrepancy between
speaker
volume level 5 and 6.
All HIMS should have done was bring levels 1 through 5 up a notch, then
they
would have been spot on, and the issue would have been closed.
As it stands in 2.0, there is no doubt in my mind that another external
volume adjustment is still required for a future release.
Again,
Bring levels 6 through 20 back to version 1.1
Increase levels 1 through 5 in line with higher incraments.
Now back to my testing LOL!
KG.
----- Original Message -----
From: "Raul A. Gallegos" <[email protected]>
To: "Book Sense Discussion List" <[email protected]>
Cc: "GW Info Discussion List" <[email protected]>; "GW Notetaker
Discussion List" <[email protected]>
Sent: Monday, December 21, 2009 11:19 AM
Subject: [GW-Booksense] BookSense 2.0 changes
Hello everyone. if you want to read up on the new changes in the
BookSEnse version 2.0 firmware, please visit the following link which
leads to a zip file containing the changes text file.
http://www.gwmicro.com/Support/Downloads/?fileNo=1144
Many thanks.
--
Raul A. Gallegos
GW Micro Technical Support Team
Voice 260-489-3671, Fax 260-489-2608
Web http://www.gwmicro.com
If you reply to this message it will be delivered to the original
sender
only. If your reply would benefit others on the list andyour message
is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-booksense in the body of the
message.
If you reply to this message it will be delivered to the original
sender
only. If your reply would benefit others on the list andyour message
is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-booksense in the body of the
message.
If you reply to this message it will be delivered to the original
sender
only. If your reply would benefit others on the list andyour message
is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-booksense in the body of the
message.
If you reply to this message it will be delivered to the original
sender
only. If your reply would benefit others on the list andyour message
is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-booksense in the body of the
message.
If you reply to this message it will be delivered to the original
sender
only. If your reply would benefit others on the list andyour message
is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-booksense in the body of the
message.