Hello John: I am using Speak Out connected to com1 and thanks for your thoughts. Take care, John
________________________________ From: Farley, John [OS-IE] [mailto:[email protected]] Sent: Thursday, March 11, 2010 2:58 AM To: John Gunn; [email protected] Subject: RE: Windows7 Professional and Window-Eyes 7.11 Hello, This does happen on my Windows 7 PC at home. On start up the logon initially uses the GW Micro DECTalk 32 voice. Once the PC has started it then uses the DECTalk Express synth attached to the PC. Note that on a different PC when this synth was attached directly to a com port it was used all of the time. Now, on this PC, it is now connected to a USB slot via a converted cable to the serial cable out of the synth. It would seem that the USB slot only becomes active once the PC has properly started and Window-Eyes is clever enough to handle it. Regards, John. John Farley *********************************************************************** From: [email protected] [mailto:[email protected]] On Behalf Of John Gunn Sent: 10 March 2010 18:17 To: [email protected] Subject: Windows7 Professional and Window-Eyes 7.11 Hello List: Here at work, just went to Windows7 Professional, all works well except when I login, I still hear Dec Access 32 and after the logon is complete goes to my default synth on com1. All startup options are set to logon meaning the default admin options ETC. Any thoughts would be appreciated. System 4GB ram, 3.0GB processor and the latest Windows updates. John If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
