I tried that here some months back, and although there are unground weather stations with in a mile of here, the default remains a station about six miles north of us in the hills with quite different temperature readings from here.
-Len On 2/6/2011 11:34 AM, Chip Orange wrote: > Sam, > > what about fiddling with the zipcode which indicates your location? > maybe you can discover you'll fall within range of another station which > has more accurate reporting. > > Chip > > > > ------------------------------------------------------------------------ > *From:* Sam bushman [mailto:[email protected]] > *Sent:* Sunday, February 06, 2011 2:21 PM > *To:* [email protected] > *Subject:* Weather or not script > > Hi all, > > I am not sure where to ask this but, when I check the temp with the > weather or not app I get the below: > > AMERICAN FORK, UT > Temperature: 29.4 F / -1.4 C > Humidity: 52% > Pressure: 30.49in > Wind Direction: SE > Wind Speed: 1.0mph > provo, utah > Temperature: 44.6 F / 7.0 C > Humidity: 49% > Pressure: 30.23in > Wind Direction: NNW > Wind Speed: 5.9mph > > These cities are about 10 miles apart. > The temp between the two cities is way different from the weather or not > app but, I live in the American fork city location. > I have a temp device outside that shows: > Temperature: 40 F > > So in other words I know the cities are almost the same in actual temp. > But, the American fork weather or not entry is not correct. > I know that the script just gets the info and displays it so it's not > the weather or not apps fault. > > Now for my question: > Is there a way to force the app to use a different weather station for > the info that may be more accurate? > > Thanks so much. > Sam > If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
