I'm not familiar with Windows Shell. So this is just a proverbial shot
in the dark. Pardon the pathetic pun.
If you're cursoring up and down and not hearing the text you cursored to
try this:
1. Open the Window-Eyes control panel.
2. Go into cursor keys, keys, and Alt-P for program cursor keys.
3. Assign your up and down arrow keys to read the current line and add a
delay to them. I generally go in increments of three. So try 3, 6, 9,
12, and so on. But if it doesn't solve the problem by 12 then make a
jump up to 20. If that doesn't solve it it's most likely not the problem
unless the line scrolling is extremely slow for some reason.
And don't forget to save your settings.
Hth,
Tom
On 7/27/2012 3:44 PM, Katherine Moss wrote:
Interesting; maybe I'll be doing that. And you should learn to use PowerShell
though as a side note. All Windows users should.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Friday, July 27, 2012 3:43 PM
To: [email protected]
Subject: RE: Window-Eyes and Windows PowerShell 2.0.
Never used Power Shell, but you could try toggling on the speak all hot key,
Catherine. Might work. Might give you too much information. It's Ins-a, if
you'd like to try it.
Lou N.
-----Original Message-----
From: Katherine Moss [mailto:[email protected]]
Sent: Friday, July 27, 2012 12:51 PM
To: [email protected]; GW Micro Support List
Subject: RE: Window-Eyes and Windows PowerShell 2.0.
Oh thanks. So then I see that Window-Eyes just doesn't read every line then,
yet it's still moving. No wonder I end up typing the wrong thing and sending
gibberish to the shell and getting an error message, the line changed!
-----Original Message-----
From: Aaron Smith [mailto:[email protected]]
Sent: Friday, July 27, 2012 10:17 AM
To: GW Micro Support List
Subject: Re: Window-Eyes and Windows PowerShell 2.0.
Katherine,
Cycling through PS commands is the same as a regular command prompt: up arrow
takes you backward, down takes you forward. Each key press replaces the current
line with the previous or next command. You can use the read line hotkey to
verify that.
Aaron
-------- Original Message --------
Subject: Window-Eyes and Windows PowerShell 2.0.
Date: Fri, 27 Jul 2012 05:27:12 +0000
From: Katherine Moss<[email protected]>
To: [email protected]<[email protected]>
Hello all,
Does anyone know the best way to cycle through commands in a
PowerShell session with Window-Eyes? For sighted individuals it's the
arrows, but what is the best way for us? Does that involve the mouse
pointer? It seems like it does, definitely. What do you guys think?
Thanks.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and your
message is related to GW Micro, then please consider sending your
message to [email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at http://www.gwmicro.com/listserv.
--
Aaron Smith
Web Development * App Development * Product Support Specialist GW Micro, Inc. *
725 Airport North Office Park, Fort Wayne, IN 46825
260-489-3671 * gwmicro.com
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information pertinent to
your situation when submitting a problem report to the GW Micro Technical
Support Team.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
