Let's try a third time. (smile) The hot key is control-alt-0. The 0 above the QWERTY keyboard. You can also go the long way. Control-backslash, alt-a, arrow to insert key layout press enter, arrow to enable and press enter.
Chris To insure that you receive proper support, please include all past correspondence (where applicable), and any relevant information pertinent to your situation when submitting a problem report to the Window-eyes Technical Support Team. -----Original Message----- From: Kevin Huber [mailto:[email protected]] Sent: Monday, September 08, 2014 10:23 AM To: [email protected] Cc: George McCoy; [email protected] Subject: Re: Mouse keys Hi: Actually, the hotkey is control-shift-0 which turns the insert key layout on or off. Kevin Huber On 9/7/14, [email protected] <[email protected]> wrote: > I wonder if you have the insert key layout app running -- you might want > to check -- I think control-0 or something like that turns it off, but > uninstalling will turn it off for sure. > > George McCoy <[email protected]> wrote: > >> I’m using remote assistance to work with a desktop computer with an intel >> dual core processor, 3 gb of ram running windows 7 ultimate 32 bit and >> window-eyes 8.4. I am installing a good bit of software and getting >> windows updates as this computer was recently upgraded from xp. In the >> course of all this I managed to create a condition where many but not all >> of the numpad keys no longer move the mouse or speak the text under and >> around the mouse pointer. >> >> I can move to the corners of the screen with numpad 1, 3, 7 and 9. I have >> visual verification that the mouse does move to the corners. >> >> I can route the mouse pointer to the control with focus with numpad insert >> num pad plus. I can left and right click. >> >> But numpad 2, 4, 5, 6 and 8 do not move the mouse pointer nor do they >> speak at all. I hear the windows ding sound when I press those keys. >> Also, the insert 2, 4, 5, 6 and 8 do not speak nor do I get the windows >> ding sound when I press them. >> Numpad minus does not appear to toggle between the mouse pointer and WE >> cursor. >> >> I have the latest driver for the graphics adaptor. I am using the windows >> 7 generic pnp driver for the monitor. The num lock key is off. >> >> I have intel accelerated graphics on this system. The screen was rotated >> 180 degrees for a while but I fixed that this evening with sighted >> assistance and turned off the intel graphics hot keys so it will not >> happen again. >> >> Has anyone else had this issue? >> Do you know what causes it? >> Did you resolve the issue? >> If so, how? >> >> Many thanks, >> George >> If you reply to this message it will be delivered to the original sender >> only. If your reply would benefit others on the list and your message is >> related to GW Micro, then please consider sending your message to >> [email protected] so the entire list will receive it. >> >> GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can >> manage your list subscription at http://www.gwmicro.com/listserv. >> ---------------------------------------------------- >> Alternatives: >> >> ---------------------------------------------------- > > -- > Your life is like a penny. You're going to lose it. The question is: > How do > you spend it? > > John Covici > [email protected] > If you reply to this message it will be delivered to the original sender > only. If your reply would benefit others on the list and your message is > related to GW Micro, then please consider sending your message to > [email protected] so the entire list will receive it. > > GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can > manage your list subscription at http://www.gwmicro.com/listserv. > > If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
