if you are not using the SyncBraille, you can get as low as 10 percent before you start getting a warning every minute. If you are using SyncBraille, it acts a bit odd because it's pulling too much juice to work the dots. Using Wireless and SyncBraille means that when it gets to around 20 percent, you need to connect it to AC power. Wireless only, about 15 percent. Nothing means you can get as low as 5 percent however you will have to hear the nagging messages. So a good all-around number is 15 percent.

Hope this helps.

Paul Styczko wrote the following on 2/14/2009 8:57 AM:
Good day,
How far can one run down the battery before the unit begins to shut down? Is there a low battery warning? Would I risk losing any data if I used the machine with a low battery. Thanks, Paul Styczko
10 Varney Street
Salem, MA 01970
Phone #: 978/223-0952


__________ Information from ESET Smart Security, version of virus signature database 3856 (20090216) __________

The message was checked by ESET Smart Security.

http://www.eset.com


--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com


__________ Information from ESET Smart Security, version of virus signature 
database 3856 (20090216) __________

The message was checked by ESET Smart Security.

http://www.eset.com


Reply via email to