Well, perhaps you don't, grin. But, the original KB article on this, which actually addressed finding the MAC address, said you needed to be in computer Braille for that, perhaps to read the thing correctly. However, since this article was a TXT document, and since some things might not translate correctly, I figured I would just play it safe it suggest one stay in computer Braille.
----- Original Message ----- From: "Stacey Robinson" <[email protected]> To: unknown <[email protected]> Date: Wednesday, Aug 4, 2010 8:40:06 Subject: Re: [GWN] voice sense confusionRe: [GWN] voice sense confusion > > > Vicki, > Why do you have to b in computer braille for this to work? > > ----- Original Message ----- > From: "Vicky Collins" <[email protected]> > To: <[email protected]> > Sent: Tuesday, August 03, 2010 10:28 PM > Subject: Re: [GWN] voice sense confusionRe: [GWN] voice sense confusion > > > > One more thing. To update that old file on your machine, meaning the one > > that gives the older version of the VS, you would do the following: > > From the main program menu, press h to go to the help menu. > > Next, press space with dots 4 5 6 to go to the bottom of the help menu. > > Then, press space with g until you hear computer Braille. > > Next, press enter on the item at the end of that help menu, meaning the > > one that says information about the voice sense. > > Next, when the information in that file starts to read, tab once to the > > save button and press enter. > > You will then have a new vsinformation.txt file in the root of your flash > > disk. > > > > ----- Original Message ----- > > From: Vicky Collins <[email protected]> > > To: unknown [email protected] > > Date: Tuesday, Aug 3, 2010 23:09:22 > > Subject: Re: [GWN] voice sense confusionRe: [GWN] voice sense confusion > > > >ar > >ar > >ar Okay, what happens when you press enter o when you launch the Sense NAV > >ar program? Or, maybe even better, this quote from part of the Sense NAV > >ar help file on the VS will help: > >ar When SenseNav launches for the first time, the map data location and the > >ar GPS receiver type will not be set. To tell SenseNav the location of your > >ar maps, do the following: > >ar 1) From SenseNav, press ENTER-O. It will then ask you to choose a map > >ar folder. > >ar 2) You will be placed on one of the memory storage devices such as the > >ar Flashdisk or SD card. If your maps are located in a place other than the > >ar default location, press BACKSPACE until the correct storage device is > >ar displayed. Press ENTER on that device and then navigate to the correct > >ar folder using a combination of the ENTER key and the arrow keys. It is > >ar important that you not press ENTER once you reach the folder containing > >ar your map files. > >ar 3) Press SPACE to select the map folder, then press ENTER and SenseNav > >ar will load the maps contained in the selected map folder. > >ar > >ar Please note: The authorization key named SenseGPS.KEY must either be > >ar located in the root of the memory card, or inside the map folder itself. > >ar If it is not, SenseNav will not FUNCTION. By default, the authorization > >ar key is already present in the root of the memory card, so this should not > >ar be an issue as long as the key has not been removed or renamed. > >ar > >ar > >ar > >ar > >ar ----- Original Message ----- > >ar From: "Mary Otten" <[email protected]> > >ar To: "[email protected]" <[email protected]> > >ar Date: Tuesday, Aug 3, 2010 22:48:18 > >ar Subject: Re: [GWN] voice sense confusion > >ar > >ar > > >ar > > >ar > Ok, space with v from th menu yields the same info that you reported. > >ar > The other info came from a file on the machine that has the mac address > >ar > and the hardware version and a bunch of copyright info. So I guess that > >ar > is an old file that doesn't change with upgrades. So ok. I have the > >ar > latest firmwear. I have put my gps key into the mapaid folder, which > >ar > has > >ar > 3 oregon 2010 maps in it along with several poi files. And sensenav > >ar > insists on asking me to point to my maps folder when I try to activate > >ar > the program, and when I do point at the folder, it says no items. So > >ar > I'm stumped. > >ar > > >ar > Mary > >ar > > >ar > > >ar > On Tue, 03 Aug 2010 22:02:36 com0400, Vicky Collins wrote: > >ar > > >ar > >Just to make sure we're looking at the same information, I did the > >ar > >space with V from the VS program menu, and I'm told I have version 5.5 > >ar > >build 20100630. I upgraded the Sense NAV and it is working just fine > >ar > >for me. > >ar > > > >ar > >----- Original Message ----- > >ar > >From: "Mary Otten" <[email protected]> > >ar > >To: "[email protected]" <[email protected]> > >ar > >Date: Tuesday, Aug 3, 2010 21:12:54 > >ar > >Subject: [GWN] voice sense confusion > >ar > > > >ar > >thx^^20. > >ar > >thx^^20. > >ar > >thx^^20. Hello all, > >ar > >thx^^20. > >ar > >thx^^20. I just got my voice sense back from being repaired. I hadn't > >ar > >used it > >ar > >thx^^20. for quite a while prior to the repair. I purchased the > >ar > >sensenav upgrade > >ar > >thx^^20. and the GW folks said that it would be upgraded while it was > >ar > >in the > >ar > >thx^^20. shop. So I got the VS and put the new maps from the 2110 set > >ar > >into the > >ar > >thx^^20. mymaps folder, having first erased the old ones but left the > >ar > >key, since > >ar > >thx^^20. I thought it might be the new key. Sensenav asks me to > >ar > >specify mymaps > >ar > >thx^^20. folder which I did, and it said no items. So I deleted the > >ar > >key and > >ar > >thx^^20. copied over the new key that GW had sent me. Still no luck. > >ar > >When I > >ar > >thx^^20. select mymaps folder when prompted by sensenav, I still get > >ar > >no items > >ar > >thx^^20. listed. The key is in the mymaps folder and mymaps is off > >ar > >the root of > >ar > >thx^^20. the flashdisk. Then I got the wild idea that maybe GW had > >ar > >forgotten to > >ar > >thx^^20. upgrade the firmwear but according to the annuoncement I get > >ar > >when I go > >ar > >thx^^20. for upgrade firmwear, I do have the latest. But my software > >ar > >version in > >ar > >thx^^20. the info is listed as 1.1 and I thought that was wrong. I > >ar > >thought we > >ar > >thx^^20. were up above 1.1 in software versions. So just color me > >ar > >exceedingly > >ar > >thx^^20. confused. > >ar > >thx^^20. > >ar > >thx^^20. Mary > >ar > >thx^^20. > >ar > >thx^^20. If you wish to unsubscribe from this list, visit: > >ar > >thx^^20. > >ar > >thx^^20. http://www.gwmicro.com/listserv > >ar > > > >ar > >If you wish to unsubscribe from this list, visit: > >ar > > > >ar > >http://www.gwmicro.com/listserv > >ar > > > >ar > > >ar > > >ar > If you wish to unsubscribe from this list, visit: > >ar > > >ar > http://www.gwmicro.com/listserv > > > > If you wish to unsubscribe from this list, visit: > > > > http://www.gwmicro.com/listserv > > > > If you wish to unsubscribe from this list, visit: > > http://www.gwmicro.com/listserv If you wish to unsubscribe from this list, visit: http://www.gwmicro.com/listserv
