Hi Raul and Ann,
Personally, I think it sounds like a motherboard damage - either due to
water damage or other unknown reason. 
As Raul said, try Hard Reset, and if it does not fix it, you might want to
send it to Texas.
Cheers,
Joseph

-----Original Message-----
From: Raul A. Gallegos [mailto:[email protected]] 
Sent: Monday, November 15, 2010 5:33 AM
To: [email protected]
Subject: Re: [GWN] BrailleSense Repair Question

Hello, my suggestion is to try a hard reset. You can go to
www.gwmicro.com/kb and read how to do this. If you have to send it in
for repair, it may be a good idea to contact the Austin HIMS office
since I believe they are now open. A visit to www.hims-inc.com will give
you additional information.

Many thanks.

On 11/15/2010 7:48 AM, Ann Edie wrote:
> Hi, Everyone,
>  
> When I turned on my 6th grade student's BrailleSense Plus the other day,
> I discovered that the last 11 cells of the display were showing a fixed
> dot pattern of dots 1, 3, 4, 6.  This did not change when typing text
> into the device, but the voice did read the entire line as typed.  A
> reset of the device caused no change in the Braille display.  I am
> assuming that this is a hardware problem, possibly caused by some rough
> handling of the device on the school bus or some other expected
> 12-year-old-type behavior.  If this is indeed the situation, I expect
> that we will have to send the device in to Hims for repair.
>  
> Can anyone tell me if there is something else we should try before
> sending the device in for repairs?  And, if we do need to send it in,
> then where do we send it during this transition between GWMicro and HIMS?
>  
> Thank you for any help.
>  
> Best,
> Ann, TVI in NY
>  

-- 
Raul A. Gallegos
GW Micro Technical Support And Product Specialist
Voice 260-489-3671, Fax 260-489-2608
Web http://www.gwmicro.com

If you wish to unsubscribe from this list, visit:

http://www.gwmicro.com/listserv

If you wish to unsubscribe from this list, visit:

http://www.gwmicro.com/listserv

Reply via email to