Hi Mike, Several suggestions and comments.
First off, if you are seeing detail loss after drybrushing, you're using too much paint. The brushes have to be, as others have said, nearly completely dry. Test on a paper towel first. Avoid thinning your paint with water (assuming you're using water-based acrylics) if you want to dry brush - the brush retains the wetness for too long and the pigment density decreases, making it really, really hard to get a decent effect. Drybrushing is something that you can practice. Get something that isn't an expensive miniature but has similar levels of little bumpy detail. I have built and painted a lot of game terrain and use drybrushing almost exclusively for that task. If you have a rough-ish surface, such as a bit of foam covered with sand, you can practice the drybrushing technique over large areas without messing with minis. Take a look here: http://www.stargrunt.ca/gallery_modeling/sg2_gal_aj_vehicles/sg2_gal_aj_veh5.htm http://www.stargrunt.ca/gallery_modeling/sg2_gal_aj_vehicles/sg2_gal_aj_veh12.htm http://www.stargrunt.ca/gallery_modeling/sg2_gal_gurkhas/sg2_gal_gurkhas_9.htm These are several pics that include buildings and vehicles that I painted with drybrushing. The technique can cover a lot of area *fast*, but it still requires a subtle touch. The subtleness mostly comes in knowing how much paint to have on the brush. At first, err on the side of not enough paint. Keep your brush almost completely dry, so that when you pass over your model, you see almost no change. You might need even 5 or 6 passes with the brush before you see something happening. That's good. From there, you can try adding just a bit more paint. Repeat. Eventually you'll get a feel for how "dry" the brush has to be for you to get a good combination of coverage and speed. If the guru at your local store can *show* you drybrushing, even better. Another suggestion (once you are past the practicing on lumpy blocks and dry glued sand stage - building game terrain is a great way to learn how to do this, because people don't look at it as closely adn you get to do lots of big areas... and it's a lot cheaper) is to see if you can find other figures cheap. Doesn't matter what they are - ships, vehicles, infantry, monsters, whatever. Stores (or friends) sometimes are giving away old junk on the cheap. Prime the old junk black and practice drybrushing. This will give you experience doing it over smaller areas. Then go back to your ships. In my experience, dry brushing is one of those things that people either get or don't get. You'll be practicing and suddenly it will work for you, and you'll have one of those "ah ha!" moments. Then it will work fine and you'll be much less frustrated. Remember, the key point here is *DRY* brushing... Good luck. -Adrian _______________________________________________ Gzg-l mailing list [EMAIL PROTECTED] http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ground Zero Games" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/gzg-group?hl=en -~----------~----~----~----~------~----~------~--~---
