Good afternoon--

There are (or used to be) "sanding sealers" out there. I remember using 
something called "Seal & Sand" on Pinewood Derby cars when I was a kid (nearly 
40 years ago now). My recollection of it is that it was varnish-like.

If you can't find a purpose-formulated sealer, the most inexpensive varnish you 
can lay hands on might serve. I'm planning to use a fair bit of balsa myself 
for the United Stars Navy, and am going to try what I've described.

Best,
Ken

--- On Sun, 9/7/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Subject: [GZG] Working with Balsa
To: [EMAIL PROTECTED]
Date: Sunday, September 7, 2008, 2:18 PM


Hello all,
 
I am reaching out to the group for some help with using balsa some custom ships 
I'm doing. I am having a problem in the finishing because invariably there is a 
wood grain that shows through the paint. Is there a way to effectively seal the 
finish model that will allow me to give my completed models a smooth finish. I 
am trying to avoid switching to plastic card and such as I find it difficult to 
work with and less versatile than balsa, not to mention more expensive.
 
Thanks,
 
Eli_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l


      
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

Reply via email to