Hi Mike,

I'll try and really answer your question.

Best way to attach steel to brass is with leather straps - DOH! - I couldn't 
help myself.

Actually, soldering won't work. The solder will adhere to the brass but not 
to the steel washer, and if it is a galvanised washer there is a remote 
possiblility it will release some nasty fumes (as in poisoness). I know the 
fumes are released when galvanized steel is welded, I doubt soldering gets 
hot enough, but why take a chance?

Super glues work best under tension and poorly under shear. So if the tube 
is crazy glued and then gets knocked, the tube surface will be in shear with 
the hole surface and the bond is likly to break. You could use a thick 
superglue and probably be ok if you make a little fillet (bead around the 
base of the tube). Clean the washer with alcohol to remove any oil residue 
from manuafacturing. Don't use any super glue accelerators as that they make 
the bond brittle.

That said, your best bet is epoxy. For this type of bond, 5 minute will work 
but I'd look for J.B.Weld, found in most hardware and auto sections. It is 
the nastiest, grippiest, epoxy I have worked with that is readily available. 
Clean the parts with alcohol so you are sure it is free of redidue. Mix up 
the JB and get a liitle in the hole. Once the tube and the washer are 
together, get a little bead of epoxy around the base. While wearing a rubber 
glove (ooooh, rubber!) wet a glove covered finger with alcohol and smooth 
the bead into a nicely radiused fillet. You can clean any epoxy smudges off 
with alcohol and a piece of paper towel. When that's hardened, you will have 
a flight stand that you can drop on the floor and the bond is not going to 
give!

Party on,
Martin

----- Original Message ----- 
From: "Hudak, Michael" <[EMAIL PROTECTED]>
To: "'Ground Zero Games List'" <[EMAIL PROTECTED]>
Sent: Tuesday, November 18, 2008 9:00 AM
Subject: [GZG] Bondage


> Hi everyone,
>
> I'm trying my hand at making some flight bases over the winter this year. 
> So far, I've got the post (square brass rod) and the base (fender washer). 
> The post fits snugly in the base, with all four corners touching the rim 
> of the inner hole.
>
> My question is, what should I use to bond the brass to the steel?
>
> I'm going to try solder...  Fills in the gaps and should hold well enough. 
> Is this the right way to go?  Should I be looking at superglue or epoxies 
> instead?
>
> Any ideas/opinions welcome.
>
> Thanks.
>
>
> Mike Hudak
> There are 10 types of people in the world, those who understand binary and 
> those who don't.
>
>
> _______________________________________________
> Gzg-l mailing list
> [EMAIL PROTECTED]
> http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.9.7/1798 - Release Date: 11/18/2008 
8:59 PM


_______________________________________________
Gzg-l mailing list
[EMAIL PROTECTED]
http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Ground Zero Games" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/gzg-group?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to