Sanded down the layering in the lamination and cut up the ring into quadrants. The sections maintained the curve perfectly! So I think we have a winner. Unfortunately I discovered that the form I was using was bigger then I actually needed so the pieces are too big for the section they were made for. On the plus side they can still be used for the larger capital ship sized wing sections.
More pics are up at: http://picasaweb.google.ca/jaime.tiampo/Miniatures# You can see the difference between the hand bent ring and the laminated one size by side. I just now have to find a smaller diameter form and I can crank them out very quickly. Jaime It takes only one drink to get me drunk. The trouble is, I can't remember if it's the thirteenth or the fourteenth. George Burns 2008/11/22 martin connell <[EMAIL PROTECTED]>: > Glad that worked out for you! Look forward to more pics! > > Martin > > ----- Original Message ----- > From: "Jaime Tiampo" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, November 22, 2008 2:23 AM > Subject: Re: [GZG] Toying with UNSC ships (sendout #2) > > >> Quick update. So I tried the lamination method. I bought a bunch of >> new supplies today including some 0.25mm sheets. My first test piece >> of 4 layers of it laminated around a cylinder turned out perfect. >> Holds the shape true and easy to produce. Once I make the mkII round >> (I made the first one a spiral instead of laying exact circumference >> pieces) I'll take some photos and post them. >> >> Very happy with the test outcome. Just have to cut it into quarters to >> see how it holds up. Should do fine. >> >> >> >> It takes only one drink to get me drunk. The trouble is, I can't >> remember if it's the thirteenth or the fourteenth. >> George Burns >> >> >> >> 2008/11/21 Jaime Tiampo <[EMAIL PROTECTED]>: >>> hmm.. never thought about laminating. I'll give that a go on top of >>> the hot water. >>> >>> It takes only one drink to get me drunk. The trouble is, I can't >>> remember if it's the thirteenth or the fourteenth. >>> George Burns >>> >>> >>> >>> 2008/11/21 <[EMAIL PROTECTED]>: >>>> Have you considered laminating multiple 0.5mm strips? Try stacking two >>>> or >>>> more pieces wrapped around a tube and hitting them with a hot liquid >>>> cement >>>> such as Tenex. The bond might help to hold the shape. >>>> >>>> Also consider what stresses might be in the styrene sheet from >>>> the manufacturing procees. I'd try either putting the strips with the >>>> same >>>> side put face to face (counter act built in stress) or cutting from a >>>> sheet >>>> with one strip cut north/south and the other cut east/west (two >>>> different >>>> stress profiles). Or hopefully the agressive adhessive might reduce >>>> stress. >>>> >>>> Hmm, let me know if that description was at all clear, I could knock out >>>> some sketches if I am being less than articulate moment.... >>>> >>>> Martin >>>> >>>> Regards, >>>> martin >>>> >>>> ----- Original Message ----- >>>> From: Jaime Tiampo >>>> Date: Friday, November 21, 2008 3:27 am >>>> Subject: Re: [GZG] Toying with UNSC ships (sendout #2) >>>> To: [EMAIL PROTECTED] >>>> >>>>> 2008/11/20 Ground Zero Games : >>>>> >>>>> > Some interesting ideas! For the wing-ring (!) I'd be more >>>>> inclined to >>>>> > look for a piece of plastic piping of a suitable diameter and wall >>>>> > thickness that you could cut a thin slice from, so that the >>>>> curve is >>>>> > already accurately formed. I'm sure there are some types of rigid >>>>> > pipe for plumbing use that are made in ABS or a similar glueable >>>>> > plastic? >>>>> >>>>> I had the same thought before I started but I couldn't find anything >>>>> that was only 1mm thickish. >>>>> >>>>> The diameter is about 2" and I think for the right look it >>>>> should be >>>>> 1-2mm thick. Might be able to use a slice out of a small yogurt >>>>> container. I'll double check with one of mine. >>>>> >>>>> Jaime >>>>> >>>>> It takes only one drink to get me drunk. The trouble is, I can't >>>>> remember if it's the thirteenth or the fourteenth. >>>>> George Burns >>>>> >>>>> _______________________________________________ >>>>> Gzg-l mailing list >>>>> [EMAIL PROTECTED] >>>>> http://vermouth.csua.berkeley.edu:1337/cgi- >>>>> bin/mailman/listinfo/gzg-l >>>>> >>>> _______________________________________________ >>>> Gzg-l mailing list >>>> [EMAIL PROTECTED] >>>> http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l >>>> >>> >> >> _______________________________________________ >> Gzg-l mailing list >> [EMAIL PROTECTED] >> http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l > > > -------------------------------------------------------------------------------- > > > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.175 / Virus Database: 270.9.9/1805 - Release Date: 11/22/2008 > 10:34 AM > > > _______________________________________________ > Gzg-l mailing list > [EMAIL PROTECTED] > http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l > _______________________________________________ Gzg-l mailing list [EMAIL PROTECTED] http://vermouth.csua.berkeley.edu:1337/cgi-bin/mailman/listinfo/gzg-l --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ground Zero Games" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/gzg-group?hl=en -~----------~----~----~----~------~----~------~--~---
