Sorry if I'm confused. Is your mask made of plaster? Or just the mold? When I make masks, I use alternate layers of cheesecloth and paper, in glue. It makes a lightweight, slightly flexible mask. Then I glue pieces of leather at contact spots for comfort. Does this sound like what you do? Sharon
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of raelee Sent: Wednesday, March 29, 2006 5:30 PM To: [EMAIL PROTECTED] Subject: [h-cost] Venetian Masking Message: 3 Date: Tue, 28 Mar 2006 14:47:21 -0800 From: "Sharon at Collierfam.com" <[EMAIL PROTECTED]> Subject: RE: [h-cost] Venetian research question - need help To: "'Historical Costume'" <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii" I'm curious. Are you making a plaster mold to then cover in whatever the mask is made of? What do you use for the base (to build upon)? Sharon, who has made masks, with difficulty, because I didn't have a good base :) Patches writes: I've got 2 methods and neither are what the pro shops use. Method 1 that I show folks is to build the mask directly on the face using plaster. This obviously requires a partner. Method 2 is like method 1 only a encase the face in plaster to make a negative mold, seal up the holes, lubricate the inside and then pour about 3/4 gal plaster mix into the negative. Then letting it set for 24 hours and peeling it out of the negative mold. Both methods allow for a mask that fits the face of the model, but not anyone else's. The masks that get built can be shaped with protrusions and etc. quite easily on the face mold with a little planning. I cover my masks with fabric rather than paint b/c I think it looks better and it make things easier for me to sew my decorations on as much as possible (I try to use only a minimum of glue.). The pro shops first make the entire mask in solid clay, so their original bust can weigh up to about 5-10lbs. Once the sculpture is complete, it is encased in a special box and plaster is poured in to fill the whole box. When the plaster has set, the plaster box is removed and the clay cleaned out, revealing a negative in the block. They then pour a glue and paper mix in to the negative and press it into the negative form with their hands and I suspect a special tool that allows them to press a uniform backing into the mask. Once the mask has set, it is popped out, trimmed and decorated. If you would like, I can send you a handout on the plaster and decoration technique that I use. I've got them drafted up already for the workshops, so sending the file isn't a big deal. Patches _______________________________________________ h-costume mailing list h-costume@mail.indra.com http://mail.indra.com/mailman/listinfo/h-costume _______________________________________________ h-costume mailing list h-costume@mail.indra.com http://mail.indra.com/mailman/listinfo/h-costume