Sorry, forgot the actual error message from scinstall:
>>> Confirmation <<<
Your responses indicate the following options to scinstall:
scinstall -i \
-C uppermiddle \
-F \
-T node=upperclass,node=middleclass,authtype=sys \
-w
netaddr=172.16.0.0,netmask=255.255.248.0,maxnodes=64,maxprivatenets=10 \
-A trtype=dlpi,name=nge0 -A trtype=dlpi,name=nge1 \
-B type=switch,name=switch1 -B type=switch,name=switch2 \
-m endpoint=:nge0,endpoint=switch1 \
-m endpoint=:nge1,endpoint=switch2 \
-P task=quorum,state=INIT
Are these the options you want to use (yes/no) [yes]?
Do you want to continue with this configuration step (yes/no) [yes]?
Checking device to use for global devices file system ... done
Initializing cluster name to "uppermiddle" ... done
Initializing authentication options ... done
Initializing configuration for adapter "nge0" ... done
Initializing configuration for adapter "nge1" ... done
Initializing configuration for switch "switch1" ... done
Initializing configuration for switch "switch2" ... done
Initializing configuration for cable ... done
Initializing configuration for cable ... done
Initializing private network address options ... done
ld.so.1: ccradm: fatal: relocation error: file /usr/cluster/lib/libclos.so.1:
symbol __cladm: referenced symbol not found
/usr/cluster/bin/scinstall[13]: 24534 Killed
scinstall: Failed to add CCR checksum to infrastructure table
scinstall: scinstall did NOT complete successfully!
Press Enter to continue:
--
This message posted from opensolaris.org
