Hello
Have you guys try these boxes ?
http://www.fit-pc.com/web/purchase/order-fit-pc2i/
I'm not related to this company but we have installed ~ 10 of those and
they are working like a charm with ubuntu server 7 and 8.
Just for fun ....
We have chose the one with a hard drive (fit-PC first version at that
time) and since its used in critical env for us and without any screen
and in remote location we were worry of what would happened in case the
unit lost power, will it reboot ?
So before putting those unit into production we did some power tests ...
I did the power failure test with an X10 device and follow the result in
Zenoss and the unit did more then 300 power off ( not a clean shutdown
just power off when fully booted in normal mode) and restart without any
issue
So we have deploy those unit and for us they do the work ...
Hope not to be too disturbing !
Guillaume
Daniel Storjordet a écrit :
Hi Willy,
Great article.
Glad I did not go through with the order myself.
Daniel Storjordet
On 30.05.2010 18:44, Willy Tarreau wrote:
Hi Daniel,
On Tue, Mar 09, 2010 at 01:40:32PM +0100, Daniel Storjordet wrote:
Hi.
Is there any success stories on using HAproxy on a GuruPlug Server
<http://www.newit.co.uk/shop/proddetail.php?prod=GuruPlug-Server>?
It is said that its speed is approximately the same as a 700Mhz P3.
We are considering placing one of these at one of the large ISP,
reducing the overhead as much as possible, and use it to forward all
traffic to our servers using HAProxy.
I finally got my guruplug server plus. To make a long story short,
it's slower than my ALIX (Geode LX 500 MHz), and heats so much that
people are reporting failures after 3 months, and I found that it
was difficult to unplug an RJ45 cable without being burnt by the
metal parts, really ! Two and half internal wires managed to break
just by moving their plug around. It's a massive crap which I would
never let run when I'm not here to monitor it !
For more information, I've put photos here :
http://1wt.eu/articles/guruplug-slow-heater/
Regards,
Willy
--
Guillaume Bourque, B.Sc.,
consultant, infrastructures technologiques libres !
514 576-7638
