do you run tests on GH arm64 agents ? is it dedicated (your own) agents attached to your repo ? can you give a link ?
ср, 6 мая 2020 г. в 13:22, Martin Grigorov <[email protected]>: > Hello HAProxy team, > > While working on a PR to build & test HAProxy on AARCH64 at GitHub Actions > I've noticed a strange behavior for some of the tests. > > To reduce the time of the build I've removed USE_OPENSSL=1 from the FLAGS > [1] passed to "make". > The build passed successfully, some of the tests are skipped because they > depend on SSL library, e.g.: > > ... > Add test: reg-tests/lua/txn_get_priv.vtc > Add test: reg-tests/lua/h_txn_get_priv.vtc > Skip reg-tests/ssl/wrong_ctx_storage.vtc because haproxy is not compiled > with the required option OPENSSL > Skip reg-tests/ssl/ssl_client_auth.vtc because haproxy is not compiled > with the required option OPENSSL > Skip reg-tests/ssl/add_ssl_crt-list.vtc because haproxy is not compiled > with the required option OPENSSL > Skip reg-tests/ssl/set_ssl_cert.vtc because haproxy is not compiled with > the required option OPENSSL > ... > > but few tests just fail: > > Testing with haproxy version: 2.2-dev7 > # top TEST reg-tests/lua/txn_get_priv.vtc FAILED (5.008) exit=2 > # top TEST reg-tests/compression/lua_validation.vtc TIMED OUT (kill -9) > # top TEST reg-tests/compression/lua_validation.vtc FAILED (10.009) > signal=9 > 2 tests failed, 0 tests skipped, 64 tests passed > ########################## Gathering results ########################## > ###### Test case: reg-tests/compression/lua_validation.vtc ###### > ## test results in: > "/tmp/haregtests-2020-05-06_09-08-49.WqBiWC/vtc.14212.7fffd08a" > ###### Test case: reg-tests/lua/txn_get_priv.vtc ###### > ## test results in: > "/tmp/haregtests-2020-05-06_09-08-49.WqBiWC/vtc.14212.065f2677" > ---- c0 HTTP rx timeout (fd:6 5000 ms) > ---- h1 Bad exit status: 0x0100 exit 0x1 signal 0 core 0 > Makefile:995: recipe for target 'reg-tests' failed > make: *** [reg-tests] Error 1 > > These tests fail both on AARCH64 and x86_64 consistently until I add back > USE_OPENSSL=1 > to the flags. > > Is there an issue with these tests ? > > 1. > https://github.com/haproxy/haproxy/blob/fafa13dd6549ee431f41dc3c1857855974d79bea/.travis.yml#L14 > > Regards, > Martin >
