I've also experimented the 'modification' on my 1026 - suggested years ago as a good one for "serious MW DXing" (!?) on a local technical monthly journal - and the result was the *same*! Of course I've immediately re-solded the components previously removed too.
Luca > Hello > > I am using the 1025 and several years ago after reading a mesage i > thionk in this list i removed one resistor on the RF input for better > usage on the MW band > However the 1025 is now overloading and have to revert it back to its > original design . But all older mesages from one year ago and before > have been deleted due to the servicemen's carelessness > What is the resistor( number and resistance) ? > ------ > Please do not send mesages above 400 kB > Zacharias Liangas , Thessaloniki Greece > greekdx @ otenet dot gr --- www.geocities.com/zliangas > Pesawat penerima: ICOM R75 , Lowe HF150 , Degen 1102,1103,108, > Tecsun PL200, Chibo c300/c979, Yupi 7000 > Antenna: 16m hor, 2x16 m V invert, 1m australian loop ---[Start Commercial]--------------------- World Radio TV Handbook 2005 is out. Order yours from http://www.amazon.com/exec/obidos/ASIN/0823077942/hardcoredxcom ---[End Commercial]----------------------- ________________________________________ Hard-Core-DX mailing list Hard-Core-DX@hard-core-dx.com http://dallas.hard-core-dx.com/mailman/listinfo/hard-core-dx http://www.hard-core-dx.com/ _______________________________________________ THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed and/or modified under the conditions set down in the Design Science License published by Michael Stutz at http://dsl.org/copyleft/dsl.txt