Thanks for sharing Paul. Bert
Sent from my iPhone On Oct 23, 2017, at 12:39 PM, Paul B. Walker, Jr. <walkerbroadcast...@gmail.com<mailto:walkerbroadcast...@gmail.com>> wrote: My Shortwave listening set up continues to evolve and I thought some people would like to see what I've been up to . Here's a collage look at pictures I took today. (Click the imgur.com<http://imgur.com> link nelow) https://imgur.com/a/6A8Wz I have honestly had a few people ask what I do/use/how I do it, so I thought I'd share this. Let me say this then explain the set up with a few comments..Except for the Wellbrook antenna amplifier/controller, all the antenna pieces were bought on amazon. Then me, who is not a handy, patient, instruction reading type of person put this all together in about 30 minutes the first day I got it. Thanks to Colin Newell in Victoria, BC, Canada.. Thomas Witherspoon at SWLing.com<http://SWLing.com> and Andy at Wellbrook for answering my incessant quesitons which encouraged me and propelled me to put this all together. Considering my location which is 50 feet from a major intersection in town and just a few blocks from downtown, I do pretty darn good noise and reception wise.. plus, this has certianly made a HUGE difference in my reception over the average Wellbrook premade magnetic loop, the W6LVP and Doxytronics loops. Top left picture is my radio listening table. The radio is an Icom IC-746Pro. Om top of it is a Zoom H1 handheld digital recorder with an audio in port that gets audio from the ICOM's audio out jack. The small box/speaking looking thing is an Tecsun ICR100 that functions as an external speaker. On the brown chair is an EmTech ZM 2 antenna tuner. A DXEngineering HF PreAmp(boosts the signal about 15db) is next to it on the tbale. The DXEngineerinf HF Preamp isn't really needed as the Icom radio has it's own 2 stage amplifier you can select manually, but I sometimes still use it on weak signals. As well, the Icom also has it's own built in tuner you manually activate but I still use the EmTech ZM2 antenna tuner as it still does help a bit on tuning up a signal to be stronger and less fade-y. The top right picture is my antenna. Single conductor 22 gauge electrical hook up wire runs up the side of a speaker stand with 1 1/4 inch pvc pipe jhammed on top for extra height. The antenna wire runs to the top of the pvc pipe, and goes 25 feet out to another pvc pipe/speaker stand and down the side..... then two ends of the wire meet in the middle. The two ends of the wire connect to a Wellbrook ALA100LN antenna amplifier and then to a antenna/radio interface box. The bottom left picture is a close up view of my radio listening gear The bottom right picture is a view of the 30 amp power supply the radio requires. The radio and power supply each weigh about 20 pounds. My gear is outside and is not permanent. I must carry it out when I want to use it and back in when I am done. -- You received this message because you are subscribed to the Google Groups "NRC-AM" group. To unsubscribe from this group and stop receiving emails from it, send an email to nrc-am+unsubscr...@googlegroups.com<mailto:nrc-am+unsubscr...@googlegroups.com>. To post to this group, send email to nrc...@googlegroups.com<mailto:nrc...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/nrc-am/CADC3Yg3RzMfin8XWO3iHNbu%3DHK51e3Br466SowW_XSkK72bUWw%40mail.gmail.com<https://groups.google.com/d/msgid/nrc-am/CADC3Yg3RzMfin8XWO3iHNbu%3DHK51e3Br466SowW_XSkK72bUWw%40mail.gmail.com?utm_medium=email&utm_source=footer>. For more options, visit https://groups.google.com/d/optout. _ Hard-Core-DX mailing list Hard-Core-DX@hard-core-dx.com http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx http://www.hard-core-dx.com/ _______________________________________________ THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed and/or modified under the conditions set down in the Design Science License published by Michael Stutz at http://www.gnu.org/licenses/dsl.html
