Thanks Marc,

You've be VERY helpful

Kevin

--- Marc Aylesworth <[EMAIL PROTECTED]>
wrote:

> KDE has a HTMl help page for CUPs and some other
> stuff. 
> 
> 
> Thank you,
>  
> Marc Aylesworth
> Health Specialist Technician
> Oneida Indian Nation
> 223 Genesee Street
> Oneida, New York 13421
> (315) 829-8909
>  
>  
>  
> This electronic transmission is intended only for
> the use of the
> individual
>  or entity to which it is addressed and may contain
> information that is 
> privileged, confidential or exempt from disclosure
> under applicable law.
> 
> If the reader of this message is not the intended
> recipient, you are
> hereby 
> notified that any dissemination, distribution, or
> copying of this
> communication
>  is strictly prohibited.  You are also requested to
> please notify the
> sender 
> immediately by e-mail and delete the original
> message.
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
>
[mailto:[EMAIL PROTECTED]
> On Behalf Of Kevin
> Toppenberg
> Sent: Monday, November 15, 2004 6:24 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [Hardhats-members] Printers... An
> overview please.
> 
> Marc,
> 
> This is wonderful.  Were did you get this
> documentation?  I have just
> looked at the man pages, and it doesn't give me
> quite enough
> information.
> 
> Thanks!!!
> Kevin
> 
> --- Marc Aylesworth <[EMAIL PROTECTED]>
> wrote:
> 
> > 
> > Cups can also connect networked printers here are
> some examples from 
> > the help files.
> > 
> > 
> > 
> > Adding Your First Printer from the Command-Line
> > 
> >  
> > 
> > Run the lpadmin command with the -p option to add
> a printer to CUPS:
> > 
> >  
> > /usr/sbin/lpadmin -p printer -E -v device -m ppd
> ENTER
> > 
> >  
> > 
> > For a HP DeskJet printer connected to the parallel
> port this would 
> > look
> > like:
> > 
> >  
> > /usr/sbin/lpadmin -p DeskJet -E -v
> parallel:/dev/lp1 -m deskjet.ppd 
> > ENTER
> > 
> >  
> > 
> > Similarly, a HP LaserJet printer using a JetDirect
> network interface 
> > at IP address 11.22.33.44 would be added with the
> > command:
> > 
> >  
> > /usr/sbin/lpadmin -p LaserJet -E -v
> > socket://11.22.33.44 -m laserjet.ppd
> > ENTER
> > 
> >  
> > 
> > As you can see, deskjet.ppd and laserjet.ppd are
> the PPD files for the
> 
> > HP DeskJet and HP LaserJet drivers included with
> CUPS. You'll find a 
> > complete list of PPD files and the printers they
> will work with in 
> > Appendix C, "Printer Drivers".
> > 
> >  
> > 
> > For a dot matrix printer connected to the serial
> port this would might
> 
> > look like:
> > 
> >  
> > /usr/sbin/lpadmin -p DotMatrix -E -m epson9.ppd \
> >     -v
> >
>
serial:/dev/ttyS0?baud=9600+size=8+parity=none+flow=soft
> > ENTER
> > 
> >  
> > 
> > Here you specify the serial port (e.g. S0,S1, d0,
> d1), baud rate (e.g.
> > 9600, 19200, 38400, 115200, etc.), number of bits,
> parity, and flow 
> > control. If you do not need flow control, delete
> the "+flow=soft"
> > portion. 
> > 
> > 
> > Thank you,
> >  
> > Marc Aylesworth
> > Health Specialist Technician
> > Oneida Indian Nation
> > 223 Genesee Street
> > Oneida, New York 13421
> > (315) 829-8909
> >  
> >  
> >  
> > This electronic transmission is intended only for
> the use of the 
> > individual  or entity to which it is addressed and
> may contain 
> > information that is privileged, confidential or
> exempt from disclosure
> 
> > under applicable law.
> > 
> > If the reader of this message is not the intended
> recipient, you are 
> > hereby notified that any dissemination,
> distribution, or copying of 
> > this communication  is strictly prohibited.  You
> are also requested to
> 
> > please notify the sender immediately by e-mail and
> delete the original
> 
> > message.
> > 
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> >
>
[mailto:[EMAIL PROTECTED]
> > On Behalf Of Kevin
> > Toppenberg
> > Sent: Monday, November 15, 2004 1:38 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [Hardhats-members] Printers... An
> overview please.
> > 
> > Marc,
> >  
> > Thanks for writing.
> > 
> > I will be trying to print from linux to an hp
> jetdirect print server.
> 
> > I think CUPS serves a printer attached to a local
> box to others on the
> 
> > network.
> > This is backwards from what I need.
> > 
> > In AIX, I have been able to set up the print que's
> to connect with 
> > jetdirect servers.  I just need to do the same for
> linux now.
> > 
> > Thanks
> > Kevin
> > 
> 
=== message truncated ===



                
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com 
 



-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
Hardhats-members mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/hardhats-members

Reply via email to