FWIW I wound up doing a little surgery and using a standard 400 watt unit on sale.
The old one ( not hooked up with the extra 4 wire plug ) tests OK with my antec tester. I am assuming the extra juice of the p4 is what is drawing it down. get faults on all rails. all is well fp At 08:51 AM 12/20/2006, Wayne Johnson Poked the stick with: >At 10:23 AM 12/20/2006, FORC5 typed: >>good advice but not practical, the MMB connectors look proprietary also. > >Usually they are not or at least they weren't in the several dozen or so that >I've rebuilt. The same applies to HP/Comprags but I have run into proprietary >Gateway mombos that made it nearly impossible but many times a little >ingenuity is all that's required to make them fit & that's why I have a 6lb >hammer laying around. ;-) > > > ---------------+-------------- >I'm a geek that loves to tweak. > -- Tallyho ! ]:8) Taglines below ! -- Friction is a drag.
