Both need to be connected. The min specs are 450w with 30a over two rails so two molex connectors. ________________________________
From: [EMAIL PROTECTED] on behalf of Winterlight Sent: Sat 3/22/2008 9:50 PM To: hardware@hardwaregroup.com Subject: [H] Power connector Sapphire Radeon X1950 PRO I just picked up a Sapphire Radeon X1950 PRO 512MB AGP on Ebay http://www.sapphiretech.com/en/productfiles/168image5.jpg It has two power molex connectors on the tail. Unfortunately the manual doesn't mention these. I am not concerned about the power as I am running a PCP&C 510. But do I need to plug both of the molex connectors in individually to the power supply, or is one is one of the molex some kind of a pass through? I assume this would use regular ATI drivers?