At 05:02 PM 28/05/2013, Tim Lider wrote:
Hello Thane,
I see this a lot. It could either be that it is taking longer to
calibrate and
go ready, if this is happening replace it quickly.
Another thing is that the power supply is not powering the hard
drive enough on
the first boot after power is turned on. This is one of the most problems that
do occur with hard drives.
I would check the power supply to see if it is sending enough Amps to the HD
during initial Boot. This means the DC +12v and +5v could be good, just not
enough amps to turn on the HD correctly.
Hi Tim,
Two machines, and both power supplies power up other HDs
fine, so I think it's the drive. Thanks for the advice.
T
