I am not an expert but I have always disabled it because depending on your
RAM it could easily kill sectors of the drive quicker than normal.



On Sun, Aug 26, 2012 at 9:14 PM, Eli Allen <[email protected]> wrote:

> Why do that?
>
> http://blogs.msdn.com/b/e7/archive/2009/05/05/support-and-q-a-for-solid-state-drives-and.aspx
>
> Should the pagefile be placed on SSDs?
>
> Yes. Most pagefile operations are small random reads or larger
> sequential writes, both of which are types of operations that SSDs
> handle well.
>
> In looking at telemetry data from thousands of traces and focusing on
> pagefile reads and writes, we find that
>  •Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1,
> •Pagefile.sys read sizes are typically quite small, with 67% less than
> or equal to 4 KB, and 88% less than 16 KB.
>  •Pagefile.sys writes are relatively large, with 62% greater than or
> equal to 128 KB and 45% being exactly 1 MB in size.
>
> In fact, given typical pagefile reference patterns and the favorable
> performance characteristics SSDs have on those patterns, there are few
> files better than the pagefile to place on an SSD.
>
>
> On Sun, Aug 26, 2012 at 10:57 PM, Gary Hunter <[email protected]> wrote:
> > Sorry haven't followed the whole thread but did you forget to disable the
> > paging file on that drive?
> >
> >
> >
> > On Sun, Aug 26, 2012 at 8:29 PM, Winterlight <
> [email protected]>wrote:
> >
> >>
> >> 330GB/day on a 84GB drive and I'm not noticing it...I don't think
> anything
> >> is writing that much data or ever did. I think something is wrong with
> >> either SMART or the drive. I am planning on calling Intel next week
> while
> >> my warrenty is still good.
> >>
> >>
> >>
> >>
> >> At 06:42 PM 8/26/2012, you wrote:
> >>
> >>> Performance monitor trace using process and IO write bytes?  Try to
> >>> see what is writing such a large amount of data.
> >>>
> >>> Eli
> >>>
> >>> On Sat, Aug 25, 2012 at 2:41 PM, Winterlight
> >>> <[email protected]> wrote:
> >>> > I recently installed Intel SSD Toolbox 3.03 in order to check the
> >>> firmware
> >>> > of my SSD X25-M80GB drive. I susequently updated to the latest
> firmware.
> >>> > However I was startled to see my drives summary screen which shows
> Drive
> >>> > Health as all green = Good but Estimated Life Remaining of only 25
> >>> percent!
> >>> > This drive was installed in May of 2010 a little over two years ago.
> >>> The PC
> >>> > is on 24/7 but 25 percent left...that means I have less then a year
> of
> >>> life
> >>> > remaing! Is this software accurate? Any comments Greg?
> >>> > thanks
> >>> > w
> >>> >
> >>>
> >>
> >>
>

Reply via email to