Am Mittwoch, den 07.01.2009, 16:45 +0100 schrieb Dieter Spaar: > > If recamping was recently > > happening, AT%SLEEP=2 only says OK, no "EXT: I".
You're misinterpretating this. If you previously issued %SLEEP=4, then -- depending on whether the modem is in deep-sleep or not -- your % SLEEP=2 is treated as a 'wakeup', to which the modem answers with a simple 'OK'. > "EXT: I" is just an indication that some extended AT commands are > executed. There is currently no way to find out if "Deep Sleep" is on. > The only thing which gives some sort of indication is that the first > typed character in the terminal got lost because it is needed to > wakeup the chip. Actually the whole transmission, not just the first character. mickeyterm by default is in line-mode,not character mode. (That's what I need for this nifty readline support :)) :M: _______________________________________________ hardware mailing list hardware@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware