Nils Faerber wrote: > For testing the process I tried to do the rework on a NEO1973 and > promptly got into trouble - I was not able to remove the capacitor! Is > it possible that it is glued to the board?
Oh, so I wasn't the only one with that luck. When I tried to convince Dieter that replacing the capacitor was really easy, I decided to give it a swift try on one of the GTA01 pre-production units I have and then brag about it. My first try was the "single iron, lots of solder" attack. To my great dismay, the cap didn't budge. I then went through all my electronics torture chamber has to offer, hot tweezers, etc., with pretty much the same lack of result. In the end, I reduced the problem to a simple mechanical one that could be solved with a dremel. I didn't know the production models had glue as well. After the accelerometer and (probably) the backup battery, that was the only place where I've encountered glue so far. So it's probably best to avoid trying to remove the cap, and just add the new one in parallel. - Werner _______________________________________________ hardware mailing list hardware@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware