PVC gutters and hangers can be a reasonable DIY solution. But getting some hardware cloth, half inch square grid, galvanized, but can be different grid sizes, can be easily bent and cut with wire cutters or tin snips.
Available at most hardware, ACE, farm & ranch stores, Tractor Supply, etc. Rabbit cage makers like soft steel clips that can wrap around 2 or 3 of the wires to connect cut pieces, make doors/access panels, etc. A couple of dollars for a couple hundred clips, and the special pliers are about $12 depending on what/where you get them. Anyway, it would make it easy to do a DIY set of wire trays. _______________________________________________ Hardwarehacking mailing list [email protected] http://lists.blu.org/mailman/listinfo/hardwarehacking
