On 10/20/09, Vasily Khoruzhick <[email protected]> wrote: > > В сообщении от 20 октября 2009 18:40:20 автор Gustav Degreef написал: > > > > Thanks Vasily. I followed the instructions on this page: > > > > http://www.handhelds.org/moin/moin.cgi/HpIpaqRx1950Documentation > > > > > and it says to make the first partition ext2 and then to put the rootfs > on > > it. Is it incorrect? If so, then I'll redo the whole thing again. I'm > > sure I'll get it to boot since others have done it. Appreciate the help. > > Gustav > > > It does not matter on which partition you put rootfs, just specify this > partition as root in cmdline in default.txt. > > Regards > > Vasily
OK, changed my default.txt and tried several times to boot and it kernel panics. With set cmdline "root=/dev/mmcblk0p2 the last few lines on the display say: rx1950: disabled charge fat: utf8 is not a recommended charset TO fat filesystems will be case sensitive! YES: mounted root (vfat filesystem) Freeing init memmory 140K Warning: unable to open on initial console kernel panic - not syncing: No init found. Try passing int = option to kernel. If I set cmdline "root=/dev/mmcblk0p1, the messages are a bit different, but the last line on the display is still the same kernel panic message. Suggestions welcome. I'm sure I'll get it. Seems I'm doing something wrong. Thanks. Gustav
_______________________________________________ Haret mailing list [email protected] https://handhelds.org/mailman/listinfo/haret
