"Information on how to go back to Dolby Digital is on page 5 of the user's manual."
I believe this operation only works on the NON Pioneer firmware. In NYC we have the Pioneer firmware. The ITEM referred to is NOT on our menu! So we are screwed! "If I read this right-- it's a bit confusingly worded -- the statement about HDMI audio isn't correct. The HDMI output definitely passes 5.1 audio. And the non-HDMi audio digital output is 5.1 one (where encoded), as well." Not clear what you are saying. 1) The HDMI sends a digitally encoded single-line 5.1? 2) The HDMI sends analog stereo? 3) The HDMI sends 6 analog channels? If (1) is true, then plugging in an HDMI cable should NOT turn off 5.1. Unless there is also an audio hand-shake which the HDMI to DVI cable doesn't pass. But I'm sure that is not true. Frankly, I think only (2) is true which is why the box switches to stereo. Best Regards, Steve Mullen Digital Video Consulting NYC www.mindspring.com/~d-v-c ------------------------------------- "Sony HVR-Z1 and HDR-FX1 Guide: HDV Technology, Production, and Post-Production" "JVC GY-HD100 Guide: ProHD Technology, Production, and Post-Production" "HDV and ProHD Handbook: The Complete Production Guide for Videographers and Filmmaker" "Panasonic AG-DVX100 Camcorder" Guide ============================= ======================================================== Community email addresses: Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner (Keith Knipschild): [EMAIL PROTECTED] Shortcut URL to this page: http://www.yahoogroups.com/community/HDTV-in-NYC ======================================================== Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HDTV-in-NYC/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
