If you copy the template over using a checksum to the temp area it would only be copied when the template on the master changed. That is how I currently do it.
Steve -----Original Message----- From: Paul Krizak [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 30, 2005 2:20 PM To: Nielsen, Steve Cc: [email protected] Subject: Re: ctime vs checksum in copies That's a fairly nifty approach, though it doesn't address the core issue of having to pull the master template off the server every time cfagent runs. This isn't a big deal for 100-1000 hosts, but within 12 months I'll be dealing with around 10,000 hosts, and doing something like copying a 20k file once an hour (or even once a day) can do suprising things to the network (like bring down filers) I'm trying to plan ahead so that as our network grows, the amount of network/CPU bandwidth required to keep the systems up to date stays about the same or even goes down. Paul Krizak 5900 E. Ben White Blvd. MS 625 Advanced Micro Devices Austin, TX 78741 Linux/Unix Systems Engineering Phone: (512) 602-8775 Microprocessor Solutions Sector Nielsen, Steve wrote: > Generally I have this approach: > > - copy the template over to a "temp area" (i.e. /var/cfengine/temp) > - do file edits on the temporary copy > - compare the temp copy to the production and copy if changed (using > checksum). > > This has worked really well for me. > > Steve > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Paul Krizak > Sent: Wednesday, November 30, 2005 1:14 PM > To: [email protected] > Subject: ctime vs checksum in copies > > I've got a question about what you guys think the best solution is in > this situation. > > I've got some files that must be customized on a per-host basis, but are > > based on a common "root" file. My goal is to have the following system: > > * When the system is first installed, or if the file on the system is > wildly different than the master, a copy: statement pulls down a fresh > copy of the file, which an edifiles: stanza corrects for that specific > host. > > * Later, if the master file changes, the clients should "know" to pull > down a new copy of the file, and then perform the same editfiles: stanza > > again. > > Using "checksum" for the copy statement doesn't really work, since once > you make a change to the file using editfiles:, the checksums don't > match and thus the file gets copied every time. On the upside, you're > guaranteed to always have the correct version of the file on the target > system. > > Using "ctime" for the copy statement *sounds* good, as the copy only > happens when the "master" file updates on the server. Where this falls > flat, however, is on freshly installed systems, where the ctime of the > *incorrect*, freshly-installed file is *later* than the ctime of the > "master" file. In this situation, the "master" file is not copied (and > I wouldn't expect it to). > > I've got several cases in my (very lengthy) cfengine config where I run > into this type of issue. For small files, I can put the entire contents > > of the file into an editfiles: block and avoid using copy: at all. This > > doesn't work for large files, however, as I don't want a cf.* file to > have a 5,000-line config file in it with Append statements. > > For large files, I use checksum copies and just accept the fact that > they will get copied every time cfagent runs. > > I'm looking to improve convergence in my config files...anybody else > have clever workarounds for this problem? > _______________________________________________ Help-cfengine mailing list [email protected] http://lists.gnu.org/mailman/listinfo/help-cfengine
