Hi, I used the following installation guide (compiled and installed using source code) https://docs.gnunet.org/tutorial/gnunet-tutorial.html/Installation.html#Installation
but I am not sure if I followed the ./configure steps what can I do now to correct it? I tried running after killing all gnunet process, But wasn't able to run all services and got same error messages in log file. Thanks, Vikas On Mon, Feb 3, 2020 at 4:34 PM Schanzenbach, Martin <[email protected]> wrote: > Hi, > > did you follow one of the installation guides? > As what user are you trying to start GNUnet? > Did you follow the instructions printed after you did './configure'? > > My guess the issue is with one of the above. > Also check if any gnunet processes are currently running and kill them > before you try again. > > BR > Martin > > > On 3. Feb 2020, at 16:11, Vikas Maurya <[email protected]> wrote: > > > > > > > > ---------- Forwarded message --------- > > From: Vikas Maurya <[email protected]> > > Date: Mon, Feb 3, 2020 at 4:09 PM > > Subject: Re: no peer visible > > To: Schanzenbach, Martin <[email protected]> > > > > > > Hi, > > This is common sequence of errors in the log file. I have also attached > log file for your reference. one more thing to mention when I run sudo ss > -ntlp, I see that gnunet-service is already listening on port 2086, even > before running gnunet-arm -s . Is this a common behaviour? because one of > the error in log file says port already in used > > $ sudo ss -ntlp > > State Recv-Q Send-Q Local > Address:Port Peer Address:Port > > > LISTEN 0 5 > 0.0.0.0:2086 0.0.0.0:* > users:(("gnunet-service-",pid=2144,fd=12)) > > LISTEN 0 80 > 127.0.0.1:3306 0.0.0.0:* > users:(("mysqld",pid=1783,fd=21)) > > LISTEN 0 128 > 127.0.0.53%lo:53 0.0.0.0:* > users:(("systemd-resolve",pid=891,fd=13)) > > LISTEN 0 5 > 127.0.0.1:631 0.0.0.0:* > users:(("cupsd",pid=12959,fd=7)) > > LISTEN 0 5 > [::]:2086 [::]:* > users:(("gnunet-service-",pid=2144,fd=11)) > > LISTEN 0 5 > [::1]:631 [::]:* > users:(("cupsd",pid=12959,fd=6)) > > logfile output. > > > > <snip> > > 60 Feb 03 16:00:25-207988 revocation-22631 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at > service.c:1140 with error: Permission denied > > 61 Feb 03 16:00:25-208096 nse-22642 ERROR Could not bind to any of the > ports I was supposed to, refusing to run! > > 62 Feb 03 16:00:25-208239 util-service-22631 ERROR `bind' failed at > service.c:1405 with error: Permission denied > > 63 Feb 03 16:00:25-208281 revocation-22631 ERROR `bind' failed at > service.c:1558 with error: Success > > 64 Feb 03 16:00:25-208304 revocation-22631 ERROR Could not bind to any > of the ports I was supposed to, refusing to run! > > 65 Feb 03 16:00:25-208924 arm-22628 WARNING Service `nse' terminated > with status exit/255, will restart in 4 ms > > 66 Feb 03 16:00:25-209153 arm-22628 WARNING Service `revocation' > terminated with status exit/255, will restart in 1 ms > > 67 Feb 03 16:00:25-215409 gns-22632 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 > with error: Permission denied > > 68 Feb 03 16:00:25-215592 util-service-22632 ERROR `bind' failed at > service.c:1405 with error: Permission denied > > 69 Feb 03 16:00:25-215627 gns-22632 ERROR `bind' failed at > service.c:1558 with error: Success > > 70 Feb 03 16:00:25-215648 gns-22632 ERROR Could not bind to any of the > ports I was supposed to, refusing to run! > > 71 Feb 03 16:00:25-216175 revocation-22643 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at > service.c:1140 with error: Permission denied > > 72 Feb 03 16:00:25-216303 util-service-22643 ERROR `bind' failed at > service.c:1405 with error: Permission denied > > 73 Feb 03 16:00:25-216337 revocation-22643 ERROR `bind' failed at > service.c:1558 with error: Success > > 74 Feb 03 16:00:25-216358 revocation-22643 ERROR Could not bind to any > of the ports I was supposed to, refusing to run! > > 75 Feb 03 16:00:25-216345 arm-22628 WARNING Service `gns' terminated > with status exit/255, will restart in 1 ms > > 76 Feb 03 16:00:25-216747 arm-22628 WARNING Service `revocation' > terminated with status exit/255, will restart in 2 ms > > 77 Feb 03 16:00:25-219790 nse-22644 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-nse.sock' at service.c:1140 > with error: Permission denied > > 78 Feb 03 16:00:25-219925 util-service-22644 ERROR `bind' failed at > service.c:1405 with error: Permission denied > > 79 Feb 03 16:00:25-219951 nse-22644 ERROR `bind' failed at > service.c:1558 with error: Success > > 80 Feb 03 16:00:25-219977 nse-22644 ERROR Could not bind to any of the > ports I was supposed to, refusing to run! > > 81 Feb 03 16:00:25-220458 arm-22628 WARNING Service `nse' terminated > with status exit/255, will restart in 8 ms > > 82 Feb 03 16:00:25-222676 gns-22645 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 > with error: Permission denied > > 83 Feb 03 16:00:25-222770 util-service-22645 ERROR `bind' failed at > service.c:1405 with error: Permission denied > > 84 Feb 03 16:00:25-222786 gns-22645 ERROR `bind' failed at > service.c:1558 with error: Success > > 85 Feb 03 16:00:25-222795 gns-22645 ERROR Could not bind to any of the > ports I was supposed to, refusing to run! > > 86 Feb 03 16:00:25-222919 revocation-22646 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at > service.c:1140 with error: Permission denied > > 87 Feb 03 16:00:25-223009 util-service-22646 ERROR `bind' failed at > service.c:1405 with error: Permission denied > > 88 Feb 03 16:00:25-223025 revocation-22646 ERROR `bind' failed at > service.c:1558 with error: Success > > > > <snip> > > > > On Sun, Feb 2, 2020 at 10:55 PM Schanzenbach, Martin < > [email protected]> wrote: > > Hi, > > > > it seems like your services fail to start. Can you post the output of > your logfile(s)? > > (~/.cache/gnunet/) > > > > You may also open a bugreport on mantis if you want to attach files. > > Or you just copy relevant parts here. > > > > BR > > Martin > > > > > On 1. Feb 2020, at 21:37, Vikas Maurya <[email protected]> > wrote: > > > > > > Hi, > > > I have recently installed gnunet(trying for the first time) and was > trying single-user setup. > > > but after installation when I run gnunet-arm -s and gnunet-arm -I , I > see that most of the services are being stopped and when I run > gnunet-peerinfo -s, I do not see any output. also gnunet-peerinfo-gtk does > not display any information. > > > > > > > > > <snip> > > > $gnunet-arm -s > > > $gnunet-arm -I > > > Services (excluding stopped services): > > > (started: 4 / failed: 6 / stopped: 30) > > > fs (binary='gnunet-service-fs', status=failed, exit_status=255, > restart_delay='6 m') > > > revocation (binary='gnunet-service-revocation', status=failed, > exit_status=255, restart_delay='6 m') > > > namestore (binary='gnunet-service-namestore', status=started) > > > gns (binary='gnunet-service-gns', status=failed, exit_status=255, > restart_delay='6 m') > > > dht (binary='gnunet-service-dht', status=failed, exit_status=255, > restart_delay='6 m') > > > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, > restart_delay='6 m') > > > zonemaster (binary='gnunet-service-zonemaster', status=started) > > > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', > status=started) > > > nse (binary='gnunet-service-nse', status=failed, exit_status=255, > restart_delay='6 m') > > > topology (binary='gnunet-daemon-topology', status=started) > > > > > > <snip> > > > > > > can you please help me in identifying what I could have done wrong > here. > > > > > > Thanks, > > > Vikas > > > >
