Hello
>>> Could you try again and report (1) what you did, (2) the >>>> ‘operating-system’ configuration you used, and (3) the error messages >>> you see and when you see them? >>> >>>> I will test the hardware with Guix 12 at the weekend >>> >>> Please stick to 0.13.0. 0.12.0 is relatively old, so you’ll find that >>> many pre-built binaries are missing, not to mention many security fixes. >> >> I use the lightweight-desktop.scm just changed user name and partition >> setup. Here are some screenshots > > It’s hard to tell much here. Is this happening with 0.13.0? One of the > screenshots shows that Python was being built from source, which is > suspicious. I used the --fallback option due to network problems I had occasionally. I suspect my internal ethernet controller making problems so for testing I used an usb ethernet connector. For now everything is fine. This time installation finished. BTW: I was not aware that Guix reboot is a scheme command. I did Ctrl-Alt-Del instead. Booting with grub failed then ;) Thank you for your help Enno