Okay. I seem to be making progress, but I’m still a neophyte.
I have a Asus NUC that contains an Intel Wifi/Ethernet chip that linux-libre
refuses to configure. So that’s what I am aiming at exposing straight to a QEMU
virtual machine that can then do what it wants with that interface (run it as a
networking interface.)
I’ve added what I take to be the configuration for vfio-pci to immediately grab
the PCI device:
(kernel-arguments
(append '("vfio-pci.ids=0x8086.0x7e40" "iommu=pt" "intel_iommu=on"
"rd.driver.blacklist=iwlwifi")
%default-kernel-arguments))
(initrd-modules (cons* "vfio_pci" "vfio" "vfio_iommu_type1"
%base-initrd-modules))
vfio-pci exists, but when I boot, the device is still controlled by iwlwfi:
00:14.3 Network controller [0280]: Intel Corporation Meteor Lake PCH CNVi WiFi
[8086:7e40] (rev 20)
DeviceName: Onboard - Ethernet
Subsystem: Intel Corporation Wi-Fi 6E AX211 160MHz [8086:0094]
Flags: fast devsel, IRQ 18, IOMMU group 12
Memory at 5020314000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable- Count=16 Masked-
Capabilities: [100] Latency Tolerance Reporting
Capabilities: [164] Vendor Specific Information: ID=0010 Rev=0 Len=014
<?>
Kernel modules: iwlwifi
But when I run dpdk-devbind.py --bind=vfio-pci 0000:00:14.3, it changes:
00:14.3 Network controller [0280]: Intel Corporation Meteor Lake PCH CNVi WiFi
[8086:7e40] (rev 20)
DeviceName: Onboard - Ethernet
Subsystem: Intel Corporation Wi-Fi 6E AX211 160MHz [8086:0094]
Flags: fast devsel, IRQ 18, IOMMU group 12
Memory at 5020314000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable- Count=16 Masked-
Capabilities: [100] Latency Tolerance Reporting
Capabilities: [164] Vendor Specific Information: ID=0010 Rev=0 Len=014
<?>
Kernel driver in use: vfio-pci
Kernel modules: iwlwifi
As I want this all to happen at boot time — qemu should also be starting at
boot time, this will be the next Fun Challenge — what am I missing? Why is the
device not being appropriately controlled by vfio-pci?
Thank you.
> Am 03.06.2025 um 10:18 schrieb Rutherther <[email protected]>:
>
> Konrad Neuwirth <[email protected]> writes:
>
>> The build log says:
>>
>> Backtrace:
>> 8 (primitive-load "/gnu/store/g942gqcbxkmjm8536kg2j4sl7ay?")
>> In ice-9/eval.scm:
>> 619:8 7 (_ #f)
>> 626:19 6 (_ #<directory (guile-user) 7ffff7812c80>)
>> 293:34 5 (_ #(#<directory (guile-user) 7ffff7812c80> #<procedu?>))
>> In srfi/srfi-1.scm:
>> 586:29 4 (map1 _)
>> 586:29 3 (map1 _)
>> 586:29 2 (map1 _)
>> 586:17 1 (map1 ("vfio_virqfd" "ahci" "usb-storage" "uas" "usb?" ?))
>> In gnu/build/linux-modules.scm:
>> 278:5 0 (_)
>>
>> gnu/build/linux-modules.scm:278:5: kernel module not found "vfio_virqfd"
>> "/gnu/store/wi539xkgd3mj07as4hv4n3jsxzmpd3pl-linux-libre-6.14.8/lib/modules”
>
> This is expected, vfio_virqfd has been added to vfio module starting
> Linux 6.2.
>
> Rutherther
